To run the presentation that goes through each room, first click on the arrow button to play then click on the Camera icon in the lower left and then click the start arrow to see the presentation. (may take a few seconds to load) You can also see a list of rooms to zoom right in to. (There will be a glove that appears as a mouse pointer for moving around)
Another shoes icon on the lower left also enables you to move through rooms. (Use the glove that appears to drag the viewing angle around)\
Please note that the 3D software utilized to create these 3D Models does not show the first floor or second floor dome sloping walls. As a result first floor layouts show incorrect window sizes and some second floor 3D layouts do not match the furniture layouts in the actual second floor plan layouts. Beneath each 3D view is the floor plan layout with furniture with the second floor showing the perimeter five foot, six foot and seven foot height lines. You can print out the layout and cut out the to-scale ruler to measure the length and width of the rooms. We apologize for any inconvenience this may cause you.
The SECOND FLOOR CENTER HEIGHT slopes down to five feet on the perimeter. However on the 15′, 18′ and 22′ domes there is very little attic area or the domes are built with no attic area. The second floor panels are too small on the 15′, 18′, 22′ and 30′ domes to accept window dormers. As a result, no bedrooms can be designed in these attics or second floor areas.
Second floor center height:
15′ – four feet ten inches
18′ – six feet four inches
22′ – six feet ten inches
To view 3D models for a few 27′, 34′ and 36′ stock plans, click on 3D.
To view 3D models for a few 40′, 45′ & 48′ stock plans, click on 3D.
To view two dimensional stock plan layouts for all the ten size dome kits, click on Stock Plans.
15 Alpha 17 – option 4
18 Alpha 17 – option 4
22′ Beta 17
Please note the above 3D model is incorrect. No bed can be designed in the loft because there is no fire egress window.
22ft Eco Cottage v2