The following contains info about Ai Building Kit Summary

Top five Cupola Panels installed after concrete beam and concrete legs poured. (top of cupola consists of the five top dome panels lifted up to set on concrete legs.)

Fourth row of Prefab Panels being assembled on 34′ dome.  45′ dome in back ground.

To view a photo gallery of photos showing the Dome Kit Assembly Process, view Dome Kit Assembly. The dome kit can be assembled by owner builders or hire a contractor. Either the home owner or the contractor can hire the independent kit assembly consultant to supervise the kit assembly.

The view sale pricing on American Ingenuity dome kits and building plans, view Sale.

Housing technology has changed very little since framing replaced the log cabin. Modifications that were made to improve a concrete home or future home also increased its cost. We applied some American Ingenuity to the geodesic dome home, designed an all new component building system utilizing advanced kit home construction technology and developed a home plan without increasing the kit home’s prices.

American Ingenuity’s concrete dome kit includes all the triangular and riser panels needed for the dome shell and one entryway. The first floor of the 30′ thru 48′ dome homes can have up to five entryways. The second floor of the 36′ thru 48′ can have up to five single window or door dormers. As a result each floor plan varies as to the number and location of entryways and dormers. Underneath the entryway or dormer “eye brow” you or your contractor builds a conventional 2×4 framed wall and installs your locally purchased windows and doors.

Because we do not know which stock floor plan you will select, Ai does not know the type or quantity of entryways or dormers that you will need. View  Building Options to learn more about entryways, dormers, link, cupola, etc. Once you determine the floor plan, Ai can provide the Building Kit with Option Pricing.

You can view and print out Ai’s stock plans for each of the ten dome kit sizes, by clicking on Stock Plans

Houses and garages are built from the Dome Building Kits. The dome homes are available in ten sizes from one bedroom/one bath to four or five bedroom/four baths. The garage domes are typically one car or two car. In the back of the Stock Floor Plan Booklet are garage dome plans. The dome homes are built on conventional concrete slabs or raised wood floors. If needed, the dome can be built on a basement or pilings and a platform. American Ingenuity does not manufacture a basement wall kit, but does design the basement plans.  To learn about possible foundations, view Foundations.

The regular pricing for the Dome Shell Kit which includes one entryway ranges from $21,300 to $55,915 depending on your square footage needs. View Pricing for a complete listing of kit sizes and regular pricing.

Wherever an “opening” is left for doors and windows, Ai does not ship triangles or riser panels. The entryway and dormer panels “eye brows” are therefore structural and are required to maintain the dome’s integrity. The 2×4 or 2×6 wall that is build under the entryways or dormers is built to frame in your locally purchased doors and windows..

The component panel for the 15′ thru 48′ domes includes seven inch thick R-28 insulation. On the exterior of the insulation is ¾” thick fiber concrete reinforced with galvanized steel mesh and on the interior of the insulation is 1/2″ Georgia-Pacific wall board. Onsite the kit is assembled one row at a time, by concreting the entryways, dormers, cupola, link and seams between the panels. Do not concrete over the entire dome. The concrete on the panels does not need to be thick because the seam concrete averages two inches.

Once all the panel seams and entryways, dormers, etc. are concreted, the temporary wooden rib system is removed. The dome shell is self supporting. No interior walls are needed to support the shell. However, normally there is a bedroom and bathroom on the first floor. So those interior walls are used to support part of the second floor. The exact locations of the suspension rods is noted on the shell geometry sheet in the Building Plans. The suspension rods and top and bottom plates can be purchased from American Ingenuity.  We use the AutoCAD program to design and calculate the load on the second floor. So just let us know if you will have an Aquarian, water bed, library, exercise room, etc. on the second floor and Ai can calculate the load accordingly. The average load calculated is 55 lbs. per square foot.

The component panels do not come with any paint on them. Ai does not add any color to the concrete. The concrete shell is painted after the entire kit is assembled. The paint should include a concrete primer and two coats of good quality exterior concrete paint. The dome can be painted any color, tan, green, blue, etc. preferably a light to medium color to reflect the sunlight. The dome exterior is repainted every four to six years depending upon your area’s pollution and UV light. If you rub your hand over the paint and get any “chalk” on your hand, that is when the dome should be repainted. As needed remove algae with a mixture of chlorine and water or pressure washing.

Ai’s dome building kit does not include doors and windows. There is such a variety and varying price points,Ai  leaves the selection of the doors and windows up to each client to purchase locally. The floor plan you select will determine how many entryways or dormers you will have. Within the entryways and dormers {eye brows}, your framing subcontractor installs a 2×4 or 2×6 wall to frame in what ever standard doors or windows that were purchased locally.

No interior items are included in the building kit other than the shell wall drywall. Ai believes you should not pay shipping on items you can purchase locally such as plumbing, electrical, framing, flooring, kitchen cabinets, bathroom fixtures, lighting fixtures, etc. To learn about the panel composition, view Component Panel.

Dome Finished Costs: The finished costs on the domes depends so much on where you live, what the labor costs are in your area and what price points you select for your windows, doors, cabinetry, flooring, lighting fixtures, etc. You can ask at your local hardware store or ask a local contractor what the finished price per square foot is running for a conventional house in the neighborhood you plan to build in. That is approximately what it will cost to finish the domes (if you do no labor yourselves), because everything in the interior is standard whether it is a conventional house or dome home….plumbing, electrical, lighting fixtures, bathroom fixtures, flooring, kitchen cabinets, windows and doors, etc. are all the same. Basically you end up with a super-energy efficient, super-strong home for about the same price as a conventional house. To learn more, view Finished Cost.

Items in the Dome Shell Kit include: Triangular Panels, 4′ Riser Wall Panels, panels for one Entryway, Galvanized Steel Mesh, Concrete Fibers, Two Concrete Admixtures, Reinforcing galvanized cable, Concrete Bonding Agent, Connecting C-Rings, C-Ring Pliers and Assembly Manual. To learn more, view Kit Contents.  To learn what is not in the Dome Kit, view Items not included in the Kit

Depending upon your floor plan selection there will be various building options. The Options include: Additional Entryway Panels (standard, high profile, garage), Window Dormer Panels, Door Dormer Panels, Cupola Panels and Link Panels. view Building Options to learn more.