Charts are Examples of Ai Dome Kits Shipped

For examples we are listing charts for a 34′ dome building kit shipped to a Florida site, a 48′ kit shipped to a Florida site and a 40′ kit shipped to Trinidad.  

The following three charts list the pricing for each dome kit and items associated with that kit’s building plans.  Ai’s philosophy is that each Buyer pays for only what is needed for their dome kit and what is needed to obtain a building permit.  Ai does not burden the price of the building kit with the price of the building plans, engineer seal on the plans or Energy Reports.  Some building departments do not require that the plans be engineer sealed by an engineer licensed for your state and do not require an Energy Report;  therefore if not required those buyers only purchase the building plans and do not purchase a seal or energy report.

The finished price per sq. ft. a home can be built for is dependent upon house square footage size, finishings, state (location within the state), what building code is enforced, site preparation based on soil and whether the dome is built by a local Contractor/Builder or is Owner Built.  Every area varies on what the finished cost per sq.ft. is because labor costs, site development costs and building code requirements vary by area.

The Dome Building Kit’s Special Prefabricated panels fit on one semi-truck.  Ai believes you SHOULD NOT PAY for another semi-truck’s shipping cost to have exterior doors, windows, kitchen cabinets, bathroom fixtures, flooring, etc. delivered. These items are conventional items which can be locally purchased after competitively shopping prices at Home Depot, Lowes, eBay, Craig’s List, etc.

 

  • In Florida all new home construction requires Building Plans be sealed by an engineer licensed in Florida and an Energy Report.  For this above Florida Buyer their plans were $993; Engineer seal for 34’ dome on slab was $600; Florida Energy Report was $190 for total of $1,783.  If your building department does not require a licensed engineer for your state to seal your plans & does not require an energy report, you do not purchase those items.
  • The total price for the 34′ Dome Kit & items described above and the Fl Engineer Sealed Plans and Energy Report was $36,815.
  • The estimated finished cost for this Florida 34′ dome which includes the $39,495 but not including the land cost, utility hook up costs, driveway installation or site preparation is $135,792.  To calculate the finished cost take the number of square feet in the dome plan times the finished cost per sq.ft. for your area.  In this case in Central Florida building costs are around $123 a sq.ft.  Their floor plan has 1,104 sq.ft. resulting in the $135,792.  FYI the costs for the land, site preparation, driveway installation and utility hook ups WILL BE THE SAME whether it is a dome or a conventional house being built.
  • Free Web Site To Calculate Finishing Costs For Your Area:   To view information on a free web site where you can look up finishing costs for a conventional home in your state and area, click on Calculating Square Footage Costs. This article also includes  a Construction Cost Estimate Report from building-cost  for a 1200 sq.ft. home in Melbourne, Florida.

    To view the floor plan layout for the 34′ dome, click on these pdfs.

Online Viewing – Opens in Browser
34′ Dome Plans 1st Floor
34′ Dome Plans 2nd Floor

The total price of the 34′ Dome Kit to a Florida site including Parts List Items, 2×4’s for temporary wooden support system, shipping, sales tax, shipping and steel hub deposit was $36,815. 

The price can vary because:

1) your floor plan selection determines the type and number of entryways and dormers.  This dome had two entryways, one window dormer and one second floor door dormer resulting in Kit with Building Options pricing of $29,004.

2) the Buyer choose to purchase 135 precut, drilled & painted 2×4’s for the temporary wooden support system – price of $1,088.  If you choose to not purchase the 2×4’s and cut them on site then subtract $1,088 from the total above.

3) Their Parts List Items totaled $1,448.  Each floor plan varies as to how much of the second floor is installed. This determines the number of suspension rods, Simpson hangers for the second floor joists, etc. This buyer chose a floor plan design which had half of the second floor installed.  Therefore this Parts List total will be more if you have more of the second floor installed.  Once your plans are finished Ai will know the specific Parts List items required.  To view an article which describes the contents of Ai’s two page Order Form, click on Order Form Description.

4) This site was in Florida so state sales tax and surtax had to be paid of $1,942. If your kit is shipping out of Florida you will not pay sales tax or surtax.

5) The $800 deposit for the steel hubs is refunded when the hubs are returned per the rental agreement.

6) Shipping cost for one semi-truck was $800.  If your site is outside of Florida then the shipping cost is based on the number of miles from our Rockledge Fl factory to your site. Currently that cost is $2.70 a mile.  Please call with your zip code and we can estimate shipping costs for one semi-truck.

 

    • In Florida all new home construction requires Building Plans be sealed by an engineer licensed in Florida and an Energy Report.  This Florida Buyer’s plans were $1,401; Florida Engineer seal for 48’ dome plans on slab is $600; Florida Energy Report for one dome on a slab is $190 for total of $2,191.  If your building department does not require a licensed engineer for your state to seal your plans & does not require an energy report, you do not purchase those items.
    • The total for the 48′ Dome Kit & items described above and the Fl Engineer Sealed Plans and Energy Report was $61,481.
    • The estimated finished cost for this Florida 48′ dome which includes the $65,254 but not including the land cost, utility hook up costs, driveway installation or site preparation is $232,064.  To calculate the finished cost take the number of square feet in the dome plan times the finished cost per sq.ft. for your area.  In this case the building costs are around $112 a sq.ft.  Their floor plan has 2,072 sq.ft. resulting in the estimated $232,064.  FYI,  the costs for the land, site preparation, driveway installation and utility hook ups WILL BE THE SAME whether it is a dome or a conventional house being built.
    • Free Web Site To Calculate Finishing Costs For Your Area:   To view information on a free web site where you can look up finishing costs for a conventional home in your state and area, click on Calculating Square Footage Costs. This article also includes  a Construction Cost Estimate Report from building-cost  for a 1200 sq.ft. home in Melbourne, Florida.
    • To view the floor plan layout for the 48′ dome, click on these pdfs.
Online Viewing – Opens in Browser
48′ Dome Plans 1st Floor
48′ Dome Plans 2nd Floor

The total price of the 48′ Dome Kit to a Florida site including custom two foot additional risers, Parts List Items, 2×4’s for support system, shipping and sales tax was $61,481.

This price can vary because:

1) your floor plan selection determines the type and number of entryways and dormers.  This dome had two standard entryways, one High Profile entryway, two first floor window dormers, two second floor window dormers and one second floor door dormer and custom two foot risers; resulting in Kit with Building Options pricing of $51,121.  If your 48′ floor plan includes fewer entryways and dormers then the kit cost will be less.  If your 48′ floor plan has a greater number of entryways and dormers then the kit cost will be more.

2) Their Parts List Items totaled $2,251.  Each floor plan varies as to how much of the second floor is installed. This determines the number of suspension rods, Simpson hangers for the second floor joists, etc. This buyer had most of his second floor installed. Therefore if the plan you select has less of the second floor installed, your Parts List total will be less.  Once your plans are finished Ai will know the specific Parts List items required.  To view an article which describes the contents of Ai’s two page Order Form, click on Order Form Description.

3) the buyer chose to have ten foot tall ceiling heights in the first floor rooms that had a second floor installed above them.   As a result this added $2,809 to his kit price.  If you choose to not purchase taller risers then costs for additional risers will not be included in your kit.

4) the Buyer chose to purchase 135 precut, drilled & painted 2×4’s for the temporary wooden support system – price of $1,088.  If you choose to not purchase the 2×4’s but cut them on site then subtract $1,088 from the total above.

5) This site was in Florida so state sales tax and surtax had to be paid of $3,318.  If your kit is shipping out of Florida  no sales tax or surtax will be paid.

6) The $800 deposit for the steel hubs is refunded when the hubs are returned per the rental agreement.

7) Shipping cost for one semi-truck to their Florida site was $800.  If your site is outside of Florida then the shipping cost is based on the number of miles from our Rockledge Fl factory to your site.  Currently shipping cost is $2.70 a mile.   Please call with your zip code and we can estimate shipping costs for one semi-truck.

.

    • This Trinidad Buyer did not need an engineer seal on the building plans or an Energy Report to obtain a permit.  Therefore he purchased the building plans only.  His Plans were for a 40’ dome on a full basement. The dome and basement plans were $1,987.  If your building department requires a licensed engineer for your state to seal your plans & requires an energy report, then you purchase those items.  The seal cost for one dome on a slab is $600.  An Energy Report for one dome on a slab is $190 – does not include California’s Title 24 Energy Report.
    • The total for the Dome Kit & items described above and the Building Plans was $41,323.  His shipping cost was $4,531 for a total of $45,854.
    • The estimated finished cost for this Trinidad 40′ dome on a full basement which includes the $46,854 but not including the land cost, utility hook up costs, driveway installation or site preparation is $285,200.  To calculate the finished cost take the number of square feet in the dome plan & basement plan times the finished cost per sq.ft. for your area.  In this case the building costs are around $100 a sq.ft.  Their floor plan includes 1,420 sq.ft in the dome and 1,161 sq.ft. in the basement for a total of 2,581 sq.ft. resulting in the estimated $258,100.  FYI, the costs for the land, site preparation, driveway installation and utility hook up costs WILL BE THE SAME whether it is a dome or a conventional house being built.
    • Free Web Site To Calculate Finishing Costs For Your Area:   To view information on a free web site where you can look up finishing costs for a conventional home in your state and area, click on Calculating Square Footage Costs. This article also includes  a Construction Cost Estimate Report from building-cost  for a 1200 sq.ft. home in Melbourne, Florida.
    • To view the floor plan layout for the Trinidad dome, click on these pdfs

Trinidad Dome: The total price of the 40′ Dome Kit including Parts List, Rental of telescoping forklift to load the container, 2×4’s for support system and purchase of the steel hubs for the support system was $41,323.   The buyer paid the $4,531 shipping cost directly to the shipping company.  

This price can vary because:

1) your floor plan selection determines the type and number of entryways and dormers.  This dome had three standard entryways, two first floor window dormers, two second floor window dormers and one second floor door dormer; resulting in Kit with Building Options pricing of $37,079. If your floor plan includes fewer entryways and dormers then the kit cost will be less.

2) Their Parts List Items totaled $2,193.   Each floor plan varies as to how much of the second floor is installed. This determines the number of suspension rods, Simpson hangers for the second floor joists, etc. This buyer had most of his second floor installed. If less of your 40′ dome second floor is installed, your Parts List total will be less.  Once your plans are finished Ai will know the specific Parts List items required.  To view an article which describes the contents of Ai’s two page Order Form, click on Order Form Description.

3) The Buyer chose to purchase 135 precut, drilled & painted 2×4’s for the temporary wooden support system – price of $1,088.  If you choose to cut them on site then subtract $1,088 from the total above.

4) the buyer paid $726 rental costs for telescoping forklift for Ai to load the container.  If the kit is shipped within the USA, the $726 will not be paid.

5) Because the kit was shipping out of the United States it would be too expensive for the international buyer to ship the hubs back to Ai for a refund; therefore the buyer purchased the hubs for $1,100.  USA buyers place a deposit of $800 for the steel hubs. The deposit is refunded when the hubs are returned per the rental agreement.

6)  The buyer paid the $4,531 shipping costs directly to the vessel line.  If your site is outside of Florida then the shipping cost is based on the number of miles from our Rockledge Fl factory to your site.  Shipping costs outside of Florida range from $2.70 to $2.90 per  mile. Please call with your zip code and we can estimate shipping costs for one semi-truck

 

Is the American Ingenuity (Ai) steel reinforced concrete geodesic dome kit  less expensive than the materials cost for the exterior walls and roof of a conventional house or wood dome or log cabin or monolithic concrete dome?  Yes.   American Ingenuity’s dome shell kit price (not the finished home cost) is about one third to one half less in cost than what the materials cost for the exterior walls and roof of a wood dome, gunited concrete dome or conventional house (exterior walls, roof trusses, plywood, tar paper, shingles, 3 1/2″ thick insulation, siding, soffits, gutters, drywall for exterior walls & the ceiling, etc.).

Calculating Finished Cost

The dome can be built and finished for about the same finished price per sq.ft. as a conventional house or business built in your neighborhood; however you receive more with the dome – greater energy efficiency, greater strength & fire resistant concrete exterior.  Each area of the country varies as to what construction workers and subcontractors charge per hour.   As a result check with a local builder to see what it costs per sq.ft. to build a moderately finished conventional house – Formica kitchen counter tops, no high end kitchens or high end bathrooms or high end flooring, etc. This is the approximate per sq.ft. finished cost the dome can be built for.

This means if it costs $110 a sq.ft to build a moderately finished conventional house in your neighborhood; then that is the approx. price per sq.ft. the dome can be built for.  For example if you built a three bedrooms/two bath size dome (40′ Theta 11 plan) with 1,521 sq.ft. for $110 a sq.ft. then the approx finished price is around $167,310.  This price includes the dome kit, kit assembly costs and labor and materials to finish the dome interior.  However it does not include 1) the price of the land; 2) driveway installation costs; 3) site development; 4) utilities – water, sewer or electric.  FYI, the costs for the land, site preparation, driveway and utility hooks will be the same whether it is a dome or a conventional house being built.

Because the American Ingenuity dome home is assembled from prefabricated panels, the kit can be assembled quicker; thus providing more savings over stick built houses, log cabins or pumped concrete domes.

Please compare apples to apples when trying to calculate finished cost of an American Ingenuity dome.  A conventional house would need walls greater than 2×10 with exterior reinforced with rebar and super thick concrete and still not come close to the advantages of an American Ingenuity dome.   A conventional house would need 11″ of fiberglass batting requiring over 10″ thick insulated walls (this is with our standard 7″ EPS R-28 value insulation) as well as additional roof strapping, rebar and concrete against storms, and still not be equal to one our structure’s insulation and strength. So please compare apples to apples!  Our kit comes with all the interior shell 1/2″ gypsum drywall installed, all the R28 insulation installed and 80% of the prefinished roof….and no wood to interrupt the insulation to rot, burn or be eaten by termites.  No shingles to blow off in high winds. Exterior concrete is primed and painted.

An Owner Builder or the dome owner’s builder can hire the independent  Kit Assembly Consultant to supervise their workers to get the dome kit assembled. Then conventional subcontractors frame in the doors and windows, prime & paint the dome exterior, complete the interior finishing – framing, electrical, plumbing, installing kitchen & bathroom fixtures & cabinets, drywall finishing, etc.

 

Materials Cost-Finished Cost

Total Materials Cost:  If you select standard items to finish the interior of your dome, the materials cost for your dome might be $50 or more per square foot. So the minimum materials cost (no labor costs) for a 40′ dome of 2,000 sq.ft. could be $100,000 (this includes the kit cost of $47,000).

Finished Cost of the house:  Finished price is more than the materials cost because it includes the labor costs plus the materials cost. So how does dome finishing costs compare to conventional house finishing costs?  If the finished price per square foot to build a conventional house in your area is $100 per square foot and you desire a 2,000 square foot house then the finished price for the conventional house would be about $200,000, if you do no labor yourself.  The finished price of the dome would be the same about $200,000 less the savings on the dome shell materials….. But you end up with more with the American Ingenuity dome. You receive a super-insulated, super-strong house whose exterior dome walls have 225 mph wind and F4 Tornado warranty. .To view summary of the advantages of Ai dome, please click on Summary.  To view info on cooling costs on 34′ dome home, please click on 1,075 sq.ft. home.

To view stock plan layouts for each size dome kit, click on Stock Plans.  To view the sale price of the building plans and dome kit, click on Plans & Kit Sale Pricing.  To view photos of finished pics of dome exteriors and interiors, click on Photos.  To view photos of Kit Assembly, click on Assembly.

Your interior materials cost varies depending on your selection of locally purchased interior items such as:

  • Formica kitchen counter tops versus granite
  • Oak kitchen cabinets versus cherry or mahogany
  • Vinyl flooring versus ceramic tile versus hard wood floors
  • Ceramic tile versus marble
  • Plastic shower stalls versus tiled showers
  • Plastic tubs versus Jacuzzi tubs
  • Jeld-wen windows versus Pella or Anderson windows
  • Standard light fixtures versus specialty
  • Standard kitchen appliances versus Thermador or Dacor appliances
  • Standard bathroom fixtures versus Aquaware or Boffi

A helpful web site is rsmeans.com It has construction manuals, construction estimating CD’s, etc.

Estimating Costs

The following information came from the book, The Complete Idiot’s Guide to Building Your Own Home by Dan Ramsey.

Can you afford to build the house you want? In Chapter 9 it states:  I’ll help you get a comprehensive estimate of your construction costs. For now, though, let’s make a rough estimate.  First, understand that whatever house you build will probably cost as much or more than that of your neighbors — unless you plan to do it all yourself. Based on this fact, let’s look at your neighbor’s houses.

As mentioned in Chapter 1, the typical house built today is about 2,300 square feet in size, and sells for around $225,000 depending on where you live. The actual price in your area may be half of that or 10 times that amount.

So, how can you get a good rule-of-thumb for your area? Of course, you can talk with contractors who will throw out numbers like $100 or $200 per square foot. That’s a wide range. What does it include? House only? House and land? Landscaping, too?

It’s smarter for you to get your own local building costs. Here’s how. Talk with a local real estate agent about new construction. It’s best if you can compare apples to apples, so ask about new homes and lots in the area you want to build. The agent should be able to tell you the lot cost, the asking price, and the square foot size of a few comparable homes. You can figure things from there.

You now have a base from which to guesstimate the approximate cost of your new house. Then you can factor in the following:

  • If you want a nicer view lot, add to the land costs.
  • If you will be your own general contractor, reduce the total by 10 to 20 percent.
  • If you will be a subcontractor, reduce the total by the sub’s fees.
  • If you want to enhance the design, tack on the additional costs or get a square-footage cost for better quality homes.

    American Ingenuity (Ai) – 8777 Holiday Springs Rd – Rockledge, Florida 32955

    321-639-8777 –  Mon-Fri 9-5 Eastern Time – GlendaB.Aidomes@gmail.com 

image_pdfimage_print