chlorofluorocarbon | AiDomes

The following info covers the low exterior maintenance on the American Ingenuity (Ai) Dome.  The Ai dome is designed to be as safe and fireproof as possible, the dome exterior is entirely noncombustible concrete.

40' dome home on left linked to 30' garage dome.

40′ dome home on left linked to 30′ garage dome.

Back in 1976 the inventor of the American Ingenuity component panel, Michael Busick, knew he wanted to use timeless building materials (concrete, galvanized steel and expanded polystyrene insulation) instead of materials that deteriorate over time like wood 2×4’s, 2×6’s, plywood, shingles and fiberglass insulation.  Michael knew he did not want to use wood in the dome shell because of termites and did not want to use shingles due to high winds or hurricanes. In today’s time this is called “Green Building.”

Since the founding of American Ingenuity, Ai has spent well over one million dollars perfecting its dome building plans, component panel design and manufacturing techniques.  You now have the benefit of all those years of manufacturing experience and plans design by purchasing the dome building plans and the dome building kit to build a super-energy efficient, super-strong home.

In a conventional house made out of wood it is difficult enough to get all the wood pieces to fit. It is especially difficult to get all the wood pieces to fit for a geodesic dome due to the angles and dimension changes. That is why the founder of American Ingenuity knew there had to be a better way to build a geodesic dome. He took the time to invent a component panel and receive a patent on it. Each panel is cut at a computer-generated angle so that it fits flush with the adjacent panel. The edges are beveled at the seams where steel and concrete unite to complete the structure.

Because of our choice of dome building materials, Ai has found its kit to be very forgiving. The E.P.S insulation can be cut with a knife so some of the insulation can be removed easily if need be. If some of the insulation is broken on site, it can be glued back on with expanding foam or pieces of scrap foam can be used to fill the gap or expanding foam can be sprayed to fill the area.

It is far more practical to build a dome with concrete than wood. Once the component panels are assembled, the American Ingenuity component panel provides the structure, the exterior finish, the insulation and the interior shell drywall finish.

The American Ingenuity dome is designed to be as safe and fireproof as possible, the dome exterior is entirely noncombustible concrete. Fire resistant concrete exterior: to view info about American Ingenuity’s concrete dome versus the Monolithic Concrete Dome and to view a YouTube Video of fire going over Monolithic concrete dome, please click on Fire Resistant Concrete Exterior.

 

2.51 seam area lifting panel Kaufman picture assembly 209

Prefabricated Component Panel Being Installed.  The wooden rib system is temporary. Once the seam areas between the panels are concreted, building options concreted and entryways and dormers framed in, the temporary wooden rib system is disassembled. There is no wood in or on the dome shell to rot, deteriorate or to be eaten by termites.  No wood or shingles to burn in a forest fire.

What does the Ai component panel consist of?

Concrete: The panel concrete is a special formulation containing synthetic fibers and liquid admixtures. The following is why Ai ships synthetic fibers with its Building Kit. Fibers in concrete work to reduce the formation of shrinkage and cracks in concrete’s plastic state while helping to improve shatter resistance and reduce water migration. The result: tougher concrete. These ingredients improve the concrete’s characteristics, create super toughness, extend durability, make concrete impervious to water, give higher tensile and compressive strength, provide elasticity for expansion, and improve freeze protection. The concrete in your dome out performs other exteriors because of its specially developed formula. Because of its exceptional composition, it actually gains strength over the years. The exterior concrete adheres directly to the steel mesh and E.P.S without the need of a bonding agent. The panel concrete is ¾” thick. The seam areas between the panels average two inch thick fiber concrete.

Steel: galvanized steel wire mesh is encased in the ¾” concrete of each component panel. As your dome is assembled the mesh of each panel overlaps adjacent panel mesh 2″ and is locked with C rings  – resulting in your home being completely encircled by galvanized steel mesh.

E.P.S. Insulation: Seven inches of sturdy, rigid R-28 expanded polystyrene (E.P.S.) insulation forms the core of each component panel. The insulation is permanent, chemically and thermally stable, resistant to mildew, provides no nutritive value to animals, plants, microorganisms, non-irritating to skin, Chlorofluorocarbon (CFC) and formaldehyde free. Ai’s insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or weather. It also acts as a vapor barrier for your home, providing stable performance year after year.  To read our most frequently asked Energy Questions and their Answers, click on Energy FAQ.

Interior Finish: consists of Georgia Pacific 1/2″ DensArmor Plus gypsum adhered to the E.P.S. with wallboard adhesive. It employs fiberglass mat facing instead of paper on both sides of the board. The core is fiberglass treated gypsum providing excellent moisture resistance, fire resistance and adhesion properties. It doesn’t provide fuel for an accidental fire. It isn’t even damaged by multiple immersions in water. It won’t harbor spores that create sick homes. DensArmor is nonstructural glass mat-faced, noncombustible, water-resistant, treated gypsum core panel.

The concrete, expanded polystyrene insulation, galvanized steel and DensArmor drywall contain no food sources for mold growth.

Painting - blacony P5080004

Dome Owner painting 40′ dome. Not pictured is rope tied to harness. On top of each dome stainless steel eyebolt(s) are installed during assembly.  When working on top of dome, a rope is tied thru eyebolt with rope tied to harness of person working on dome.  Current technology allows for paint to be dispensed to roller from paint sprayer that sits on the ground.

stroupe safety on dome

Painter’s harness attached to rope for safety.

Klaus leo washing 090

Above picture is of a painted 34′ dome being pressure washed.  Prior to pressure washing kill algae with bleach/water or oxygen bleach/water.  Worker has harness tied to eye bolt. The dome is repainted when the paint begins to chalk.  …usually every 4-5-6 years.  The Ai dome has no roof to replace. No wood in or on the dome exterior to rot or to burn or for termites to eat.  No roof to blow off in high winds.  Lower rows of panels can be pressure washed with person standing on ladder or in cherry picker, etc.

What is the routine exterior maintenance on an Ai Dome?

Painting is the only routine exterior maintenance….there is no wood in or on the shell to rot, to be eaten by termites or to burn. After the final coat of seam concrete and allowing the dome to be washed by rains for three weeks to one month to remove efflorescence, Ai recommends a coat of a good quality concrete primer followed by two coats of good quality paint. Ai dome owners recommend the use of Ames Research Laboratories primer, tape and paint.  This paint can be purchased at Ace & True Value Hardware stores for similar price that paint can be purchased at Home Depot & Lowes.  Ai’s Assembly Manual includes complete info on weather proofing the dome.

Your dome can be painted in any color. It is preferable to use a light to medium color to assist in sunlight reflection. Dark colors absorb more heat and create more thermal expansion when the sun is shining.

The component panels do not come with any paint on them. Ai does not add any color to the concrete. On site the seams between the panels are concreted so if Ai painted the panels or added color to the concrete it would not match your painted dome concrete. The concrete shell is painted after the entire kit is assembled.

For an existing dome please call our  office for the most current painting info for previously painted domes or water proofing info for unpainted domes.  Phone 321-639-8777 Mon – Fri 9-5 eastern.

How often should the Dome be repainted?

Typically the dome is repainted every 4-5-6 years, depending on your personal preference. If you rub your hand on the paint and remove any “chalk” then it is time to pressure wash, kill algae with bleach/water solution or oxygen bleach/water, pressure wash the dome and paint when dry.  Best to roll the paint on to achieve correct thickness per the paint manufacturer. Yes the domes can be walked on if the person’s harness is tied to a rope secured around a cupola or through an eye bolt. If you do not have a cupola, during assembly install eye bolts in the top of the dome to tie a rope through. Your building plans specify the installation of a top vent with five eye bolts installed around the vent.

kolb pressure washing

This dome pic is of a 40′ dome that had been previously painted. 
Prior to repainting the dome, kill algae with combination of bleach water or oxygen bleach & water, then pressure wash the dome. The dome is repainted when the paint begins to chalk.
…usually every 4-5-6 years.  No roof to replace. 
No wood in or on the dome exterior to rot or to burn or for termites to eat.
No roof to blow off in high winds.

What if I get a leak in the dome?

With each building kit synthetic fibers and two liquid admixtures are shipped. A concrete mix recipe is included in the Assembly Manual which is shipped with each kit.  Certain steps must be followed during the assembly of your dome kit to prevent leaking: First, follow the recipe in the Manual which describes the adding of the synthetic fibers and liquid admixtures as your onsite concrete is mixed in a mortar mixer NOT a cement mixer.  Second water down cured or prefab concrete around where new concrete will be applied. When applying second layer of concrete in the seams and on entryways and dormers, apply the bonding agent (supplied with your kit) to cured watered down concrete and allow to rest 30 minutes before the second coat is added to achieve a proper bond between the two coats of concrete. Keep concrete misted as it cures.  Watering down techniques are described in the Manual.

A coat of something rigid like pea gravel, rock, etc. should not be applied to the exterior of the dome. The rigid substance will not be flexible to take the expansion and contraction that the dome experiences with temperature changes. The component panel concrete and the concrete mixture mixed on site for the seams is a special mix per the Assembly Manual which allows the concrete to expand and contract.  Ai ships with your kit polypropylene fibers and two liquid admixtures (one is an air entrainment and the other is a water reducer) with the dome owner purchasing extra fibers and admixtures.  On site the fibers and admixtures are mixed in your bags of Portland Cement, masonry sand and water in a mortar mixer per the concrete mix recipe in the Manual.

Usually it is easier to repair a leak in Ai’s concrete dome than it is to make a repair in a shingled roof. Generally applying elastomeric patching compound or caulk & elastomeric paint is all it takes to seal an area but stopping a leak in shingles usually requires removing and replacing shingles.

Ai does not depend on the concrete to make the dome watertight. The dome gets additional sealing with a concrete primer and two layers of paint.

How much paint is required for each coat?

Based on 150 sq.ft. per gallon of coverage for each coat applied:

Dome Size
22′
25′
27′
30′
34′
40′
45′
48′
Exterior Surface
1,036
1,189
1,484
1,611
1,994
2,645
3,255
3,652
Gallons of Paint
7
8
10
11
14
18
22
25

Take the Exterior Surface Area and divide by 150 to determine an approximate number of gallons for each coat of paint for each size dome. Yes, the exterior surface is just the cement surface itself, and does not include the dormers. For each entryway add 220 sq.ft. for each window dormer add 30 sq. ft. for each door dormer add 50 sq.ft.

The following info came from the web site http://www.masonryforlife.com/GreenBuildConsum.php

Today, studies show that people are more concerned about the environment than most issues that face us.  A number of environmental trends in the building industry have evolved in the last several years, including the “green build” concept. This concept employs building methods and materials that are ecologically responsible.

Masonry products play a significant role in “green build” concepts because they are natural products that do not deplete limited precious resources like timber. Other than helping to save our forests, masonry also contributes to a healthier home for its inhabitants. Masonry helps to make homes allergy resistant by creating near air-tight homes. Homes built with masonry are also quieter and help reduce or eliminate the build up of mold and fungus between interior and exterior walls.

The philosophy behind “green building” or earth-friendly building is that today’s decisions should not be at the expense of future generations, while utilizing local resources with a minimum environmental impact.

Building with masonry is a timeless art form that goes back to the great Egyptian pyramids, Greek temples and Roman cities. Many of those structures are still standing today! Masonry has always been the choice for enduring, natural beauty. In modern times, masonry has been the choice for residences because of the strength and durability of masonry.

Part of the reason is value offered to the home buyer. Another reason is that many builders are turning to environmentally responsible (earth-friendly) building methods, and masonry products play a large role in “green build” or earth-friendly concepts.

Building with masonry offers a number of benefits for the homeowner including protection, low maintenance living, savings and value.

Fire Resistant – Non-combustible materials

Weather Resistant – Exterior Walls that will hold up to heavy storms, U.V. degradation, blistering heat, and sub-zero temperatures.”

Termite Resistant – Exterior walls made of masonry means there’s no wood to eat.

Protection from Rotting, Mold and Fungus – With no exterior wood on the walls, there is nothing to rot and masonry plays a large role in significantly reducing or eliminating the build-up of fungus and mildew between interior and exterior walls.

Superior Sound Proofing – Masonry blocks out noise better than traditional building materials, resulting in a quieter home environment.

Virtually Maintenance Free – When used in its natural form, masonry provides lasting beauty that requires considerably less maintenance than other building materials.

Lower Insurance Premiums – Because masonry provides higher levels of security, fire and termite protection, and does a better job of weathering the storm, many insurance companies offer up to 15% discounts on homeowner’s policies.

Environmentally-Friendly “Green” Products – Masonry products play a large role in ecologically responsible building methods and is recognized by government programs as a contributor to green building status. In many cases, building within “green built” guidelines results in impact fee, tax breaks and permit fee savings for the homebuilder. Masonry products are earth-friendly because they do not deplete precious natural and limited resources like timber.

Increased Resale Appeal – There’s a widely-held opinion, supported by studies, that masonry homes offer a greater resale value than other forms of construction. Key reasons are the fact that masonry homes are high quality, low maintenance homes.

The standard seven inch thick (R-28) expanded polystyrene insulation (E.P.S.)  in the American Ingenuity 22′ thru 48′ dome building kits can be upgraded to nine inch thick (R-36) E.P.S.  See below for pricing.  To view the detailed data and characteristics of E.P.S. insulation, please click on Panel Composition and scroll down the page to view the EPS data.

Cold northern climates like Vermont and Wisconsin, etc. are appropriate areas to build Ai dome kits with the thicker 9″ (R-36) insulation. If a 45′ or 48′ dome’s insulation is upgraded, your shipment will require two semi-trucks for delivery.  The Ai dome with 7″ E.P.S. will easily outperform conventional housing with 11″ thick fiberglass insulation. Instead of purchasing thicker insulation from American Ingenuity consider applying the money you would have spent for the thicker insulation to purchase thermal coverings for windows, triple paned windows and insulated doors.

E.P.S.- Expanded Polystyrene Insulation

E.P.S. is frequently mistakenly referred to as “Styrofoam”. Although they both come from the same “base” material, polystyrene, the two products differ in many respects. “Styrofoam” is the registered name of Dow Chemical Co. and refers to the extruded polystyrene insulation product produced and marketed solely by that company. “Styrofoam” is generally blue in color and has a minimum density of about 1.80 pounds per cubic foot. It has a different cell structure (like hollow bubbles) and has a marginally lower better R value, but is considerably more expensive, not only per board foot but even more so on a “cost per R” basis. E.P.S. is available from more than 100 manufacturers throughout the country in a variety of sizes, densities and forms. “Styrofoam” is only available from one company in a more limited range of sizes.

Seven inches of sturdy, rigid R-28 expanded polystyrene (E.P.S.) insulation forms the core of each American Ingenuity component panel. This insulation is permanent, chemically and thermally stable, and resistant to mildew, provides no nutritive value to animals, plants, microorganisms, is non-irritating to skin, and is Chlorofluorocarbon (CFC) and formaldehyde free. This E.P.S. insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or weather. It also acts as a vapor barrier for your home, providing stable performance year after year.

The E.P.S. that Ai uses is sometimes referred to as bead board and sometimes incorrectly referred to as Styrofoam (Styrofoam is the trade name for extruded polystyrene manufactured by Dow Chemical Co). Ai does not use Styrofoam.

American Ingenuity uses the one pound per cubic foot density, closed cell E.P.S. which has a thermal resistance (R-value) of 4.17 per inch of insulation at near freezing temperatures. This also explains why it is a very common insulation used in housing and sold at hardware stores. Ai uses the 7” thick E.P.S. which has an R-value of about 28.

Ai chose the expanded polystyrene over the extruded polystyrene because the extruded polystyrene is almost twice the cost with only a slightly better R-value.

When should you purchase the 9″ thick E.P.S.? If you have five or more days a year where the temperature reaches zero degrees then you may want to purchase the thicker 9″ insulation. If you have hotter days than most climates, we leave it up to you whether you need the 9″ thick E.P.S.. On the price list go to the Building Options and look down the list for 9″ Insulation.

Ai does not recommend that you purchase the 11″ E.P.S. insulation unless you live in a severe climate like the Northwest Territory of Canada.

Insulation Comparisons:

  • 2×4 solid wood with 3 1/2″ fiberglass is about R-8.
  • 8″ Concrete Block, with 3/4″ air, 3/4″ Celotex is about R-9.
  • 2×6 Solid wood construction with 5 1/2″ fiberglass is about R-11.
  • 2×4 solid wood with 3″ urethane is about R-13.
  • 7″ E.P.S. insulation is R-28 and is comparable to 11″ of fiberglass insulation.
  • 9″ E.P.S. insulation is R-36.
  • 11″ E.P.S. insulation is R-44.

American Ingenuity’s component panels for the 22′  thru 48′ domes includes the R-28 insulation and most of the steel reinforced concrete exterior finish and all the interior shell wallboard. Typically, in wooden domes you will likely have to purchase the insulation, wallboard and roofing materials for extra costs.

2015 Pricing For Thicker 9″  E.P.S. Insulation
22′
27′
30′
34′
40′
45′
48′
call for pricing
call for pricing
$2,650
$3,090
$3,715
$4,305
$4,795

 

If you upgrade your 40′, 45′ or 48′ dome with 9″ EPS more semi-trucks will be needed for delivery.  The 40′ or 45 ‘ & the 48’ kit will require two trucks for delivery. All Kits whose insulation is upgraded are considered Specialized Orders and are custom made for that Buyer.  These orders require a 50% deposit to start manufacturing.  If the specialized order is cancelled any payments made are non-refundable.

Q: Why are your dome homes so energy efficient?
A:
You can save 50-70% on heating and air-conditioning costs with your American Ingenuity dome over a conventionally built home. Some of the reasons for this superb energy efficiency are:

  • Super insulation that does not degrade with time, moisture, or compaction.
  • Spherical shape means reduced exposed surface.
  • Airtight exterior virtually eliminates energy leakage.
  • Solid thermal envelope.
  • Uniform R-value. The insulation is not interrupted with structural members (e.g. 2X4’s roof trusses). The only breaks are for doors and windows.
  • Downsized heating and cooling equipment.

Your kit comes with lifetime R-28 E.P.S. insulation or if you choose, thicker R-36 E.P.S. insulation is available. Even in cold climates, you may find that a single ventilating wood stove can heat a smaller dome (22′, 27′ or 30′) will provide all the heat your home will need. Larger domes need a centralized ducting system or mini-split ductless unites to disperse the heated or cooled air throughout your dome.

 ANALYSIS OF EXPANDED POLYSTYRENE INSULATION (EPS)

The Expanded Bead Polystyrene (E.P.S.) Insulation that American Ingenuity utilizes is seven inches of sturdy, rigid R-28 modified E.P.S. insulation that forms the core of each component panel. The E.P.S is one pound per cubic foot density (pcf).

The E.P.S. insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or weather. It also acts as a vapor barrier for your home, providing stable performance year after year.  The E.P.S. is:

·         permanent

·         chemically and thermally stable

·         resistant to mildew

·         provides no nutritive value to animals, plants, microorganisms

·         non-irritating to skin

·         Chlorofluorocarbon (CFC) and formaldehyde free.

 

 

16.15 un loading truckKaufman picture assembly 121

45′ dome kit being offloaded from semi-truck using lull. 

Or an all terrain fork lift can be used.

All panels are lettered per the Building Plan Nomenclature blueprint.

 

45' dome kit off loaded from semi-truck.

45′ dome kit off loaded from semi-truck.

 

Side of view of panel being installed. The panel exterior is 3/4″ concrete reinforced with galvanized steel mesh. After the mesh is overlapped and locked between panels, on site special fiber concrete is mixed and hand trowelled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas are about 3″ deep by 5″ wide with average of 2″ thick concrete.

Side view of triangle panel being installed. The panel exterior is 3/4″ concrete reinforced with galvanized steel mesh. After the mesh is overlapped and locked between panels, on site special fiber concrete is mixed and hand trowelled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas are about 3″ deep by 5″ wide with average of 2″ thick concrete.

The above wooden rib system is temporary and supports the panels until all the seam areas between panels are concreted and the entryways and dormers are concreted.  Then the dome is self supporting and the system is disassembled.  Steel hubs are returned to Ai for a deposit refund. Some of the 2×4’s can be used for interior framing or the framing of the second floor perimeter knee wall.   The dome shell contains no wood to rot, no wood to burn, no wood for termites to eat and no shingles to blow off in high winds. The exterior concrete is primed and painted with two coats of paint. Dome owners seem to prefer Ames primer and paint which can be purchased at Ace, True Value, Handy Hardware, Orgill, Do It Best or Wallace Hardware.  Info about painting is in the Kit Assembly Manual which is shipped to each dome buyer.

Q: What does my American Ingenuity dome kit include?

A: The American Ingenuity dome building kit contains all of the component panels needed to build the basic dome shell and panels for one entryway. These panels consist of triangular panels, the four foot high vertical riser panels and one set of entryway panels. Each floor plan varies as to type and number of additional entryways, window dormers, door dormers, etc.  Within the entryways and dormers {structural awnings}, your framing subcontractor installs a vertical framed wall and installs your locally purchased standard exterior doors and windows.  Click on Building Kit Contents to learn more.  To learn what is not included in the Kit, click on Not Included.

The Building Options include: Additional entryway panels, window dormer panels, door dormer panels, cupola panels and thicker insulation.are available Click on Building Options to learn more. Once you select a floor plan, Ai can give more specific pricing for your building kit with building options.

The component panel includes: the seven inch thick R-28 expanded polystyrene (EPS) insulation. On the exterior of the insulation is ¾” thick fiber concrete reinforced with galvanized steel mesh and on the interior of the insulation is adhered a 1/2″ Georgia-Pacific DensArmor gypsum drywall. Onsite the kit is assembled by concreting the entryways, dormers, cupola, link and seams between the panels. The entire dome is not concreted over….only the seams between the panels and the entryway and dormers are concreted.  For the interior shell finish, fill the wall board seams with tape and joint compound. Apply primer and two coats of paint to the exterior.

The component panels do not come with any paint on them. Ai does not add any color to the concrete. On site the seams are concreted, if Ai painted the panels or added color to the concrete it would not match your painted seam concrete. The concrete shell is painted after the entire kit is assembled. The painting should include a concrete primer and two coats of good quality exterior concrete paint. The dome can be painted any color, tan, blue, green, etc. preferably a light to medium color to reflect the sunlight.  Ai’s dome owners have successfully sealed their domes using Ames Research Laboratories primer and paint which can be purchased at Ace or True Value Hardware for about the same price as Lowes and Home Depot paint.

The American Ingenuity (Ai) dome building kit does not include doors and windows. There is such a variety and varying price points, Ai leaves that up to each client to purchase locally. The floor plan selection will determine how many entryways or dormers your dome will have.

No interior items are included. Ai believes you should not pay shipping on items you can purchase locally such as: plumbing, electrical, framing, flooring, kitchen cabinets, kitchen appliances, bathroom fixtures, lighting fixtures, etc. Purchase at local building supply stores: Lowes, Home Depot or from eBay and Craigs List.

Q: What determines the type and number of Building Kit Options I need for my Building Kit?
A:
Your floor plan selection determines the type and number of Building Kit Options. On the first floor of Ai’s 30- 48′ residential house domes there can be as many as five entryways. On the second floor of the 27′ dome and the 34′ – 48′ domes there can be as many as five window or door dormer in our house domes. On our web site we have displayed a few of our stock floor plans which illustrate different numbers of first floor and second floor options. If you do not see a plan to fit your life style, Ai can email other stock plans for your review.  Ai can customize any plan or start from scratch with your sketches and develop a custom floor plan layout.  Click on Plans.to learn more.

Q: Does the Building Kit contain any interior items?
A:
No interior item is supplied except each triangle panel and riser panel has 1/2″ gypsum drywall adhered to it.

Q: What size windows and doors will fit in the Window Dormers and the Door Dormers?
A:
Click on Window Sizes to see this answer.

Q: What is the component panel’s composition?
A:
The component panel consists of steel reinforced concrete adhered to one side of the rigid expanded polystyrene (E.P.S.) insulation and 1/2″ Georgia Pacific DensArmor drywall adhered to the under side with wallboard adhesive.  Your American Ingenuity dome kit is affordable, strong and assembles quickly because it is engineered as a system of prefinished component panels. Each panel is cut at a computer-generated angle so that it fits flush with the adjacent panel. The edges are precisely beveled at the seams where steel mesh and concrete will unite to complete the structure.

Concrete: The panel concrete is a special formulation containing synthetic fibers and liquid admixtures. The homeowner purchases bags of Portland cement and masonry or stucco sand locally. Ai ships these same fibers and admixtures with your building kit so the seam concrete mixed on site will have the same properties as the panel concrete. These ingredients improve the concrete’s characteristics, create super toughness, extend durability, give higher tensile and compressive strength, provide elasticity for expansion and improve freeze protection. The concrete in your dome out performs other exteriors because of its specially developed formula. Because of its exceptional composition, it actually gains strength over the years. The exterior panel concrete is 3/4″ thick and reinforced with galvanized steel mesh.

Steel: galvanized steel wire mesh is encased in the concrete of each component panel and extends out over the insulation’s beveled edges. As your dome panels are assembled the mesh of each panel overlaps and is locked to that of the adjacent panels with C-rings (commonly called “hog rings”). The dome panels then become completely encircled by steel mesh.

E.P.S. Insulation:

E.P.S. Insulation in Ai domes:  standard insulation is seven inches of sturdy, rigid R-28 expanded polystyrene (E.P.S.) insulation forms the core of each component panel. The E.P.S. Ai utilizes is closed cell with a 1 lb. per cubic foot density. The insulation is permanent, chemically and thermally stable, resistant to mildew, provides no nutritive value to animals, plants, microorganisms, non-irritating to skin, Chlorofluorocarbon (CFC) and formaldehyde free. The EPS insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or the weather. It also acts as a vapor barrier for your home, providing stable performance year after year.  Click on Insulation to learn more.

Wall Board: Consists of Georgia Pacific 1/2″ DensArmor adhered to the E.P.S. insulation with a wallboard adhesive.

Q: If I am not ready to assemble my dome, can it be stored outside?
A:
Yes. However if you expect to have your kit outside for more than two months, when you order your kit,  request that the E.P.S. edges be painted. Do not allow the kit to sit outside during the freezing rain or winter.

Building a Concrete Home – Panel Composition.  Because of fires, super storms, hurricanes and tornadoes, home owners are researching concrete home construction and finding the American Ingenuity concrete dome kit. Building an Ai dome from prefabricated concrete panels makes home construction easier and results in the dome exterior having a 225 mph wind and F4 tornado guarantee. The process of stacking the panels, overlapping/locking the steel mesh of adjacent panels and filling the seams with special fiber concrete, produces the structural components of the home, the finished concrete surface, installs the insulation and all the dome shell 1/2″ drywall.    To learn about Building Kit Assembly click on Assembly.  An Expanded Assembly Manual is now available with each dome kit order.

How long does it take to assemble the dome kit if I use the Kit Assembly Specialist? Depending on the size dome, and if your building kit has two entryways and four dormers with dome built on concrete slab, the shell assembly with one layer of concrete in the panel seams and on the entryways and dormers can take about 9 to 16 days. Assembly time depends on the number of workers in your team, your foundation type, weather and the type of hoisting mechanism. Click on Kit Assembly Specialist to learn more.

Side of view of panel being installed. The panel exterior is 3/4″ concrete reinforced with galvanized steel mesh. After the mesh is overlapped and locked between panels, on site special fiber concrete is mixed and hand trowelled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas are about 3″ deep by 5″ wide with average of 2″ thick concrete.

Side of view of panel being installed. The panel exterior is 3/4″ concrete reinforced with galvanized steel mesh. After the mesh is overlapped and locked between panels, on site special fiber concrete is mixed and hand trowelled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas are about 3″ deep by 5″ wide with average of 2″ thick concrete.

 

Concrete Home
Exterior Dome Panels Have No Wood To Burn or To Rot or For Termites To Eat
No Shingles or Roof to blow off in high winds

To support the panels during dome kit assembly, a temporary wooden rib system is installed. Once all the seams are concreted and the entryways and dormers are concreted, the dome is self supporting and the wooden rib system is removed. Most of the wood can be recycled as interior framing.

In this view of dome kit being assembled a side view of a component panel can be seen. The panel exterior is 3/4″ concrete reinforced with fibers & galvanized steel mesh. After the mesh is overlapped and locked between panels, special fiber concrete mixed on site is hand troweled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas average of 2″ thick concrete.

What are the American Ingenuity triangular and rectangular shaped panels made from? Center core of 7″ Expanded Polystyrene R-28 Insulation (not Styrofoam!), exterior is ¾” thick concrete reinforced with fibers & galvanized steel mesh with interior of 1/2″ Georgia-Pacific DensArmor Plus High-Performance gypsum drywall board (which is moisture resistant, mold resistant gypsum and noncombustible).  None of the materials in the panel are combustible or contain a food source for mold growth.

Superior Insulating Technology The core of each panel consists of a seven inch block of R-28 rigid modified expanded polystyrene (E.P.S.) insulation. The E.P.S. Insulation that Ai utilizes contains NO HBCD, NO TCPP, NO CFCs and NO formaldehyde and is not Styrofoam.   The EPS that Ai utilizes has a flame retardant added to it, therefore the EPS is noncombustible and is protected by the 1/2″ DensArmor wallboard which is non-combustible and provides the Code required 15 minute thermal barrier.   The EPS that Ai utilizes does not out gas poisonous chemicals.

Your American Ingenuity concrete home kit is affordable and strong because it is engineered as a system of prefinished component panels. Each panel is cut at a computer-generated angle so that it fits flush with the adjacent panel. The edges are precisely beveled at the seams where steel mesh and concrete will unite to complete the structure.

Q: Do you have an engineering statement about your dome panels that can be reviewed?

A:  Yes, to view the statement click on Engineering.

After the foundation is installed, the dome shell assembly consists of:

  • Erecting a temporary wooden rib system with supports under each hub.
  • Using some type of hoisting mechanism place the component panels one row at a time upon the rib system.
  • Overlapping the steel mesh from adjacent panels. Locking the steel mesh with “C” rings and pliers. Depressing the mesh into the seams.
  • Installing rebar, cables, hardware, (headers, king studs for doors and windows)  and suspension rods in appropriate seams per the building plans.
  • Watering down prefab concrete in the areas where new concrete will be applied. Applying one layer of fiber concrete in the seams and on the entryway/dormer panels one row at a time. Depending upon the dome size, there are four to five rows of panels.
  • Once the last row is installed then the second layer of concrete is applied in the seams between the panels and on the entryways and dormers. Bonding agent is applied between the two layers.  Cured concrete in the seams and around the area where new concrete is being applied is watered down prior to bonding agent and new concrete being installed.  The new concrete is misted per the Assembly Manual.
  • Only the seam areas between the panels and the entryways/dormers/cupola/link are concreted. Do not concrete over the finished prefab concrete on each panel.
  • Finishing exterior framed walls and Installing your locally purchased doors and windows.
  • Removing the temporary wooden rib system. Most of the wood can be recycled into interior framing and second floor perimeter knee wall framing.
  • Watering down the concrete exterior 3-4 weeks to remove efflorescence prior to priming and painting the concrete exterior.
  • Hiring conventional subcontractors: framer, electrician, plumber, drywall finisher, cabinet installer, HVAC, etc. to finish the interior of the dome.
  • Priming and painting the exterior of the dome.
  • Finishing the seams between the interior shell wall board with joint compound, fiberglass tape and applying joint compound in a skip trowel method over all the shell drywall.  Ask Ai for latest interior shell finishing document.
  • Priming and painting the shell wallboard.

To learn more about Hoisting Mechanisms click on Hoisting.  To learn more about entryways, dormers, etc. click on Building Options.

For special discounts, click on Sale.   For Building Option Pricing click on Basic Kit Prices and then scroll down the page for the building options chart.  

American Ingenuity’s Component Panel’s steel mesh, concrete, EPS insulation and DensArmor wallboard contain no food source for mold growth and are therefore mold resistant.  The Georgia Pacific wallboard is not conventional sheet rock. Conventional sheet rock consists of  conventional gypsum and paper backing.  Sheet rock when it gets wet crumbles and molds with the paper matting as a food source for mold growth.  The DensArmor gypsum when it gets wet does not crumble.  It has fiberglass backing on both sides is no food source for mold growth. 

Tell us more about American Ingenuity’s panel materials.

Concrete: The panel concrete is a special formulation containing synthetic fibers and liquid admixtures. Locally purchase bags of Portland cement and masonry sand.  After the mesh is overlapped and locked between panels, special fiber concrete mixed on site is hand troweled in the seam areas in two applications — bonding agent is applied between the two layers. The seam areas are about 3″ deep by 5″ wide with average of 2″ thick concrete.  Prior to applying new concrete, water down all concrete around areas where work will be done. 

Mix the ingredients with a Mortar Mixer NOT a cement mixer!  Ai ships with your building kit the same fibers and admixtures that are used in the panel concrete so the seam concrete which is mixed on site will have the same properties as the panel concrete. These ingredients improve the concrete’s characteristics, create super toughness, extend durability, give higher tensile and compressive strength, provide elasticity for expansion and improve freeze protection.  The first layer of seam concrete contains two liquid admixtures and synthetic fibers.  The second layer does not require fibers; however now due to advances in fiber technology there are small 1/4″ fibers which can now be added to the second layer.  These smaller fibers for the second layer can be purchased from Ai.

The concrete in your concrete home out performs other exteriors because of its specially developed formula. Because of its exceptional composition, it actually gains strength over the years.

The exterior panel concrete, which is 3/4 inch thick, adheres directly to the steel mesh and E.P.S. insulation without the need of a bonding agent.  The panel concrete is hand applied, hand troweled, and hand sponged at American Ingenuity’s Rockledge Florida factory.  During the on site process of concreting the seams, entryways, dormers, etc., a bonding agent is applied on the first layer of concrete before the second layer is applied.  Bonding Agent is supplied with the kit with additional bonding agent being purchased from Ai. This bonding agent is not diluted onsite.  It is used full strength and must rest 30 minutes before new concrete can be applied over it.  Prior to applying bonding agent, water down cured concrete.  Before applying second layer of concrete, water down all cured concrete in the seams and around where the new concrete will be applied.  The final layer of concrete is sponge float finished on site.

Steel: Galvanized steel wire mesh is encased in the concrete of each component panel and extends out over the insulation’s beveled edges. As your dome panels are assembled, the mesh of each panel overlaps minimum 2″ and is hooked to that of the adjacent panels with C-rings (commonly called “hog rings”). The dome then becomes encircled by steel mesh.

E.P.S. Insulation that Ai utilizes contains NO HBCD, NO TCPP, NO CFCs, NO formaldehyde.  The EPS thickness is 7″ (R28).  The seven inches of sturdy, rigid, nontoxic R-28 expanded polystyrene (E.P.S.) insulation forms the core of each component panel. This is NOT Styrofoam!  The E.P.S. Ai uses is a closed cell with a 1 lb. per cubic foot density. The insulation is permanent, chemically and thermally stable; resistant to mildew; provides no nutritive value to animals, plants, microorganisms; non-irritating to skin.  The insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or the weather. It also acts as a vapor barrier for your home, providing stable performance year after year. To learn more about E.P.S. as a Vapor Barrier click on Vapor Barrier.

ANALYSIS OF EXPANDED BEAD POLYSTYRENE

The Expanded Polystyrene (E.P.S.) Insulation that American Ingenuity utilizes is seven inches of sturdy, rigid R-28 modified E.P.S. insulation, which forms the core of each component panel. The E.P.S is one pound per cubic foot density (pcf).  EPS is NOT Styrofoam.

The E.P.S. insulation will not rot, shrink, absorb moisture, compact, or deteriorate due to age or weather. It also acts as a vapor barrier for your home, providing stable performance year after year.  The E.P.S. that American Ingenuity utilizes in its prefabricated panels:

  • is permanent
  • is chemically and thermally stable
  • is resistant to mildew
  • provides no nutritive value to animals, plants, microorganisms
  • is non-irritating to skin
  • contains NO Chlorofluorocarbon (CFCs) and is formaldehyde free
  •       Contains NO HBCD (hexabromocyclododecane) and NO TCPP (1-chloro-2-propyl) phosphate

What kind of vapor barrier will American Ingenuity dome have?  Approximately one quarter of the energy consumed by an air conditioner is used to extract water vapor from inside the house. Water vapor easily passes through most building materials and is readily swept into homes through joints, seams and through the attic. The E.P.S. insulation that Ai uses provides a good vapor barrier.   And the Ai building system provides for an air tight house.

During the US Dept of Energy Study on energy efficiency in  housing designs, the blower door test showed the American Ingenuity dome to be 56% tighter than the conventional test structure and 29% tighter than the Dow house.  To see if air was passing through walls of the dome, tests using infrared were performed. Thermal irregularities in the dome were shown to be insignificant.

Per the manufacturer of the E.P.S. which American Ingenuity uses, “the E.P.S. is closed cell and will not absorb more than 2.5% of water based on volume”.  E.P.S. is often used as flotation for docks because it will not absorb water. 

Per E.P.S. manufacturer’s data sheets the following description was given to explain how the E.P.S. is affected by Moisture:  “To retain their original insulation value, all insulation materials must remain dry.  Water is a good conductor of heat so a high moisture content in the insulation results in a significant loss of performance.  This is particularly so with fibrous materials which must be positively protected by an efficient vapor barrier.  Two ways in which moisture can affect insulation materials are; water absorption from contact with damp surfaces or rain penetration or from interstitial condensation of water vapor.  E.P.S. is a closed cell material and has minimal water absorption and low water vapor transmission.  Both of these properties are to a large extent, density related, but also to the degree of fusion of the material.  Tables 4 and 5 show typical performance figures for good quality E.P.S. boards manufactured to Arco Polymers recommendations.”           

Table 4  Water Absorption

Density (pcf)                                  1.0 lb                            1.5 lb                             2.0 lb
(pounds per cubic foot)

Water absorption (% vol)        less than 2.5                  less than 2.0                  less than 2.0

Table 5 Water Vapor Transmission (WVT)

Density (pcf)                                                     Grains (hr/sqft) In/Hg (Perm inch)

1.0                                                                                            1.2-2.2

2.0                                                                                            0.6-0.8

2.5                                                                                            0.5-0.7

3.0                                                                                            0.5-0.7

The amount that a material will breathe is measured in perms or sometimes perm inches.

 “Note: FHA requirements for perimeter insulation are that the original K value of the material must not increase by more than 15% after repeated wetting and drying cycles.  Tests have been carried out on nominal 1.0 pcf density E.P.S. with an original K value (at 75 degrees F) of 0.26.  After submersion the K value was found to be 0.28–an increase of only 7.7%.”

 Climatic Changes:  E.P.S. board has been used as an insulation material in various types of building structures for over 35 years in climatic conditions ranging from Arctic cold to desert heat and has performed satisfactorily.  E.P.S. does not become brittle at sub-zero temperatures (in fact its K value improves) and suffers no loss of impact resistance at -100 degrees F compared with 73 degrees F.  The maximum recommended continuous operating temperature is 175 degrees F.  Roof surface temperatures in Southern States may reach this temperature for short periods, but with suitably designed roof systems E.P.S. can be used under these conditions.”

In Ai’s building system the water is stopped on the outside surface because the concrete is rich and dense enough to inhibit significant absorption and it is coated with a primer and two coats of good quality exterior concrete paint which further insures against leaks.  If a leak occurs the remedy is to check the area for hair line crack that gets repaired with elastomeric patching compound and another coat of paint.  If and when any water gets past the concrete very little will be absorbed by the E.P.S.

Now this brings up breathability of the E.P.S.  The amount that a material will breathe is measured in perms or sometimes perm inches.  E.P.S. will breathe enough to allow it to dry out inside our walls.  At the same time it is tight enough to also serve as a good vapor barrier. Ai’s insulating concrete panel (ICF) is made from expanded polystyrene (E.P.S.) molded into lightweight foam blocks. The foam itself provides excellent insulation with an R value of R-28. The R-value of E.P.S. remains constant. (R-values of traditional fiberglass insulation decreases when the material is wet or damaged.)  Ai chose to manufacture its dome component panels with Modified Expanded Polystyrene (E.P.S.) foam because of its fire performance, structural performance, and environmental advantages. Modified E.P.S. contains no formaldehydes, no CFCs, no HBCD, no TCPP or toxic chemicals, and uses fewer resources to manufacture than other insulation products.  E.P.S. provides you with superior thermal performance to better insulate your buildings, and no harmful CFC’s have ever been used to manufacture it.

You can now recycle your jobsite scrap through a network of manufacturers, re-processors, and retailers across the country. E.P.S. is a valuable resource than can be remanufactured into foam packaging or made into an amazing array of polystyrene products from office supplies to video cassette cartridges.  To locate your nearest E.P.S. collection site, call the RECYCLING HOTLINE at 1-800-944-8448.  Please recycle jobsite scrap.

Expanded Polystyrene (E.P.S.) Facts

The E.P.S. that American Ingenuity utilizes is manufactured from expandable polystyrene beads containing a hydrocarbon blowing agent and a flame-retardant additive that contains NO HBCD (hexabromocyclododecane) and NO TCPP (1-chloro-2-propyl) phosphate. Ai’s insulation is made from Nova Chemicals M-77 E.P.S. product.

The EPS Ai utilizes is a closed cell, lightweight, resilient, foamed plastic composed of hydrogen and carbon atoms. There are two common types of polystyrene foam, Extruded Polystyrene or X.E.P.S. (Popularly known by its Dow trademark, Styrofoam) and Expanded Polystyrene (E.P.S.). American Ingenuity utilizes only Expanded Bead Polystyrene that contains NO HBCD, NO TCPP, NO CFC’s and NO formaldehyde. Ai does not use Styrofoam.

During the processing of E.P.S., steam heat softens the beads and causes the blowing agent to expand to produce moisture-resistant multi-cellular particles, which increase in size up to 40 times their original volume.  Following a period of stabilization, during which time the beads lose their moisture, the blowing agent condenses out and air diffuses into their cellular structure, the pre-expanded beads are molded into blocks of insulation.

The benefits of E.P.S. thermal insulation products are its lightweight, has stable long-term thermal resistance, no R-value loss over time (Source: 1985 Study conducted by Structural Research, Inc. for NRCA, MRCA, and SPI), and cost effectiveness when compared to other rigid board insulations on the basis of R-value.

Is E.P.S. a water, vapor or air barrier?

E.P.S. is considered water resistant and vapor permeable and at the density and thickness that American Ingenuity utilizes, the material acts as both a vapor retarder and an air barrier. This characteristic essentially moves the dew point to the exterior side of the concrete wall, minimizing interior humidity in the summer, and at the same time eliminates air infiltration in all seasons which is recognized as a major cause of R-value loss in fiberglass insulation. Air exchangers or heat recovery ventilation systems are highly recommended!

Is E.P.S. foam toxic?

E.P.S. is an inert, non-biodegradable organic plastic foam which will not rot and is highly resistant to mildew. According to National Bureau of Standards Combustion Tests, data collected from seven labs concluded that under the worst case fire scenario, fumes from E.P.S. are no more toxic than those from wood (Douglas Fir).  

Is E.P.S. Flammable?

Due to the flame retardant added to the EPS during expansion, the EPS is not combustible but will melt and draw back from a heat source.  Tests have shown that the smoke and soot produced from the melting EPS is less than is produced by burning Douglas Fir wood.  Of course no one wants to breathe smoke or soot…that is why there are smoke detectors to alert occupants to fire.  The requirements of all the major code organizations for foam plastics is that they have a flame spread of not more than 75 and a smoke development rating of not more than 450. The foam used in Ai’s component panels has a flame spread rating of 15 and a smoke development rating of 125 based on ASTME84-87 tests, well below the code requirements.

If you are in an extremely cold climate (Vermont, South Dakota, Canada) you may want to purchase 9″ EPS R36 insulation.  Just remember if you purchase the thicker insulation, this will increase the size of the panels, which will cause a 45′ r 48′ kit to require two trucks for delivery. To learn more about the properties of the E.P.S. click on E.P.S. data and then scroll down the page to Analysis of Expanded Bead Polystyrene.

1/2″ Georgia Pacific DensArmor Plus Gypsum Wall Board

Drywall/WallBoard: Consists of Georgia Pacific 1/2″ DensArmor Plus High Performance Gypsum Panels adhered to the E.P.S. insulation with a wallboard adhesive  with moisture treated core.  DensArmor Plus High-Performance Interior Panels are noncombustible (as defined and tested in accordance with ASTM E136 or CAN/ULC S114) interior panels that consist of a moisture-resistant gypsum core with coated fiberglass mats. The fiberglass mats provide superior protection from incidental moisture.  The treated core and the coated facings made with fiberglass offer greater moisture resistance and improved dimensional stability than regular gypsum board. The product resists warping, rippling and buckling.

The DensArmor has zero flame spread and zero smoke development and complies with the 15 minute thermal barrier test as described in 2010 Florida State IRC Section R316.4.

Georgia Pacific’s Dens-Deck roof board is a patented nonstructural glass mat-faced, noncombustible, water-resistant, gypsum core panel.  Georgia Pacific does not add any flame retardant to its gypsum products.  The DensArmor contains no HBCD and no TCPP.

Q: Does the interior shell wall board that American Ingenuity uses support the growth of mold?
A:
. DensArmor Plus Panels are highly resistant to the growth of mold, and have scored a 10, the highest level of performance for mold resistance under ASTM D3273 test method. DensArmor Plus Interior Panels are the first drywall panels to be GREENGUARD indoor Air Quality Certified and GREENGUARD Children & Schools Certified for low emissions of volatile organic compounds (VOCs) by a leading third-party organization, GREENGUARD Environmental Institute.  In addition, DensArmor Plus interior Panels are the first drywall panels listed as GREENGUARD microbial resistant.  This listing means Dens-Armor Plus Panels, which feature fiberglass mats instead of paper facings used on the surface of traditional gypsum board products, resist mold growth.  The microbial resistant test is based on ASTM D6329, a testing standard set by ASTM International, which develops testing guidelines and procedures for building materials, products, systems, and services.

Green, brown or black algae can appear on the wallboard. Algae just needs water and sunlight to grow.  Algae can be removed with a combination of chlorine and water or oxygenated bleach and water.

The wallboard is adhered to the EPS with a wallboard adhesive.  The glass mats embedded into the core on both faces, results in dimensional stability and prevents warping. The glass mat is encapsulated with a coating which reduces skin irritation from exposed glass fibers. Please use a mask when cutting the DensArmor.

Fire Protection: Per Georgia Pacific:

  • 1/2″ Dens Armor Plus High Performance Gypsum Panels are gypsum panel products, designed for interior use, are manufactured to meet the temperature rise criteria of a thermal barrier as described in Section R316.4 of the 2010 Florida Residential Building Code.
  • In addition to having a non-combustible core per ASTM E 136, Dens Armor Plus has been evaluated by Underwriters Laboratories LLC per UL 723 Standard for Test for Surface Burning Characteristics of Building Materials. DensArmor Plus has a Flame spread/Smoke Development of 0/0.
  • The Finish Rating Thermocouple Temperatures obtained during the evaluation (WFCI Project No. 06047A) was conducted at Western Fire Center (WFCi) in Kelso, WA. WFCI is a recognized testing facility per the Gypsum Association (GA-600).
  • The Finish or Membrane Protection Rating was determined to be 0.15:40 for 1/2″ DAP. Please note the average ambient temperture was 21.0 degrees C for the 5 Finish Rating Thermocouples.
  • Properties of Dens-Armor: Noncombustible, Water Resistance, Dimensional Stability, Decay Resistance, Resistant to Warping, Rodent and Fungus Resistance, Torch Safe, High Compressive Strength.

The wallboard seams can be finished similar to drywall by applying joint compound and adhesive backed mesh tape on the seams. To blend the taped seams to the drywall finish, apply joint compound in a skip trowel fashion over the dome shell drywall.  Please call Ai for latest drywall finishing document.  Prime and paint the drywall.

 If I am not ready to assemble my dome immediately, can it be stored outside? Yes, but not in freezing weather. If you expect to have your kit outside for more than two to three months, when you order your kit request that the E.P.S. edges be painted.   Call us for details at 321-639-8777.

What do the component panels weight?

Dome Diameters 22′ 27′ 30′ 34′ 40′ 45′ 48′
Triangular (lbs)

155-180

245-295

120-150

160-200

230-275

275-355

315-400

Riser (lbs)

255

315

230

260

315

350

380

How are the panels supported during assembly?  Ai recommends using the temporary “wooden rib system.” The rib system consists of your own 2×4’s (cut to length and holes drilled to our specs) and steel hubs on loan from American Ingenuity to erect a free standing geodesic framework. The 2×4’s can be purchased from Ai (precut, holes drilled with ends painted) and shipped on the truck with your kit. The deposit on the hubs is $1,600 for a 5 month rental time…$20 a month rental thereafter, with the client paying to ship the hubs back to Ai to receive their deposit back less any additional months rental and any cost for any missing or damaged hubs. The bolts/nuts/washers are purchased for $128 and are not returned to Ai.  An Expanded Assembly Manual is now available with each new dome order.

The “Rib System” dictates the exact panel placement. Once all the seams/options have been concreted and entryways/dormers framed in the “Rib System” is removed and recycled into the interior framing and the hubs returned to us.  Click on Rib to learn more.

How are the panels hoisted into place? And what equipment is attached to the panels to make lifting easier?

  • The typical method for lifting the panels is by man lift, crane or transverse fork lift.
  • Monthly rentals on transverse lifts also called Boom Lifts, Horizontal Boom Fork Lifts, Roofing Lifts, Shooters are available from National Rental Chains.
  • Four Panel Lifting Spikes are purchased from Ai for $120 and attached to your locally purchased chain and couplers.  To learn more about the spikes click on Lifting Spikes.  Please scroll down the page to find the spikes info.