mother in law home | AiDomes

The following information covers Tiny Home Kit reg & sale pricing w’ specs.  Ai has added two new tiny home sizes to its Tiny Home assortment – 15′ and 18′!   These Tiny Dome Home Kits are constructed using Ai’s superior prefabricated insulated concrete panel system.  Consider them for Special Hideaway, vacation cabin, mother’s home, guest house, hunting cabin, glambing, tiny home, micro home, cottages for resort, rental units for veterans or a starter home.  The Ai dome is much stronger, has noncombustible materials in its wall panels, fire resistant concrete exterior & more insulated than a framed house, concrete block house, log cabin, tent or yurt.  Also all the panel materials contain no food source for mold growth.

Additional dome kits can be added later and linked to the first dome built on your site.  If you believe you want to add on later, discuss with our design team and a link can be installed on the first dome where a second dome can be connected later.

Tiny Dome Home Kits when assembled and finished can result in 172 sq.ft. to 1,278 sq.ft.  The domes can be one story. Dome sizes are measured by feet in diameter with the 15′, 18′, and 22′ kits having a first floor with optional attic/loft.  The 27′, 30′ & 34′ can have a second floor installed if you so desire. The 27′  dome second floor panels are large enough for a window dormer to accept fire egress size window.  The 34′ second floor window dormer is too small to accept a fire egress window so door dormer panels are installed above a first floor standard entryway to accept a fire egress size casement window.  With a 2nd floor egress window installed this allows the 27′ & 34′ domes second floor to contain a bedroom; resulting in the 27’ & 34’ domes being two bedroom/two bath size homes. The 30′ dome second floor panels are not large enough for a window dormer so no bedroom can be designed – use the 30′ second floor for storage, office, craft area, additional bathroom, rec room.  To view stock plans for the 15′ and 18′ along with plans for the other Tiny Domes, click on Tiny Home Plans.

22-woods-demo

22′ Tiny Dome Home After Building Kit Assembled & Finished with locally purchased materials.

As far as Tiny Homes meeting minimum size house requirements – in some areas,  groups are petitioning their county or their city elected government officials to allow them to have Tiny Home Communities (called pocket neighborhoods) where the minimum house size can be below state code. The City of Rockledge, Florida agreed that a group whose face book page is called Rockledge Tiny House Community can purchase property and build Tiny Homes from 172 sq. ft up to 1000 sq ft. in their city.   Normally in Florida the minimum new house size requirement is 500 sq.ft. or 800 sq.ft. or 1,000 sq.ft.  So congratulations to the City of Rockledge Tiny House Group for its victory in changing minimum size house requirements in their city to as small as 172 sq.ft..

Please check local codes to see how Tiny Homes can be built for cottages in a resort or for rental units to rent out to migrant workers, veterans and individuals wanting to live in strong (225 mph & F4 tornado warranty), energy efficient houses whose exterior concrete is fire resistant.  To view comparison of concrete dome kit to log cabin, click on log cabin.  To view info on Ai dome and tree impact & snow load, click on Tree.   To view complete summary of advantages of Ai dome, click on Summary.

Tiny Dome Building Kit Contents:

  1. 15’ & 18’ Kits consist of all the triangle prefab panels and standard 4’ risers plus 2’ riser prefab component panels for the dome shell and panels for one entryway. The kit can be purchased with 7″ EPS, 1/2″ Drywall & exterior 3/4″ concrete reinforced with galvanized steel mesh/fibers.  And only the 15′ & 18′ kits can be purchased with 3 1/2″ EPS, no drywall and no reinforced concrete.  The larger kits cannot be purchased with only 3 1/2″ EPS because this size insulation makes the larger panels to flexible causing EPS breakage.
  2. 22’ & 27’ Kits  consists of all the triangle prefab panels and standard 4’ riser prefab component panels for the dome shell and panels for one entryway.  5 foot tall risers can be ordered instead of the standard four foot tall risers. Your floor plan selection determines how many more entryways and dormers are in your kit.
  3. 30’ & 34’ Kits consist of all the triangle prefab panels and standard 4’ risers prefab component panels for the dome shell and panels for one entryway. To increase first floor ceiling height where a second floor is above, on site install a one foot tall or two foot tall perimeter wall to increase the height to 8’6″ or 9’6″.  Your floor plan selection determines how many more entryways and dormers are in your kit.

Each triangle and riser prefab component panel consists of exterior ¾” fiber concrete reinforced with galvanized steel mesh, center core of 7″ R-28 expanded polystyrene (EPS) insulation with interior special moisture resistant, mold resistant 1/2″ gypsum drywall from Georgia Pacific called DensArmor Plus. During kit assembly it can rain. Water does not harm this special DensArmor drywall. The 15′ & 18′ kits can be purchased with 3 1/2″ R14 EPS insulation and no drywall. 

The dome kit’s prefab concrete panels can be assembled by owner builders and is a true Do It Yourself kit. All the panels come marked with numbers and letters to match the building plans and the Assembly Manual. On site,  fiber concrete is troweled into seams between the panels and on the entryways or dormers. Seam concrete average thickness averages two inches. An Independent Kit Assembly Consultant can be hired to supervise your workers or your Builder’s workers during kit assembly.

15% Discount Tiny Dome Housing Kits*
If Deposit & Order Placed per Coupon

  •  To schedule your kit for manufacturing, Ai requires signed Order Form, Conditions of Sale (Warranty), Specialized Material Agreement and kit deposit (Check is made payable to American Ingenuity).
  • Accept delivery of your Kit per Coupon allowing Ai to select the week/day of shipment within the month agreed upon by Buyer & Ai to make 20% discount possible.
  • To acquire a building permit, building departments usually require engineer sealed building plans and an Energy Report. Stock or Custom plans take 2-10 weeks for delivery. Allow 4-8-12 weeks for kit manufacturing time.
  • Standard Building Kits contain all the triangular & riser panels to complete the dome shell and one entryway. Each floor plan varies as to the number of entryways, door dormers and windows dormers. Additional Entryways, Dormers, Risers are offered at current pricing.
  • This special incentive cannot be combined with other discounts or savings offers.

2

Where doors & windows are located in the dome, structural awnings called entryways and dormers must be installed. The number of entryways and dormers are determined by your choice of floor plan. Entryway panels consist of 3½” EPS with no steel mesh or concrete. Steel mesh is purchased from Ai and attached on site with panels requiring on-site concreting. Dormers consist of 3 ½” EPS wrapped with steel mesh & require on site concreting. Call for Link pricing. Links can be purchased with 1/2″ DensArmor drywall. Links consist of precut 7” EPS. Steel mesh can be purchased from Ai. The link requires on-site mesh installation and concreting. American Ingenuity Domes are designed with flexibility, allowing you to create your own personal home and floor plan layout. Exterior doors & windows are purchased locally and installed onsite within the entryways and dormers using locally purchased materials. Solar tubes can be installed onsite within a panel. (Do not cut within 8” of a seam).

PAYMENT: Tiny Home Building Kit orders require a 30% deposit. The balance including USA shipping costs, in the form of a bank check, is due 21 days prior to shipment.  If kit to shipping to a Florida site, add Florida sales tax & your Florida’s county surtax. No credit card charges. *Pricing does not include shipping or building plans. If kits are exported, buyer pays freight forwarder directly for inland trucking costs and ocean shipping costs.

SHIPPING:  American Ingenuity can arrange shipping on 53’ step deck semi-trucks. Freight varies from $2.50 to $2.90 per mile ($800 minimum) per truck, from American Ingenuity plant in Rockledge, Florida. One truck can carry five 15’ kits; or two 18’ kits;  or two 22’ kits;  or one 22’ kit & one 27’ kit; or one 30′ kit; or one 34′ kit – each with 7” EPS insulation.

15′ & 18′ Kit:  If 3 ½” EPS and no drywall one truck can carry up to ten 15’ kits; or up to  four 18’ kits. 22’, 27′, 30′ and 34′ kits cannot be purchased with 3 ½” EPS.  The panels are too large in these larger kits to manufacture with thinner 3 1/2″ insulation. The 7″ insulation is required so the panel is not flexible during movement.

The 15’ kit and 18’ kit (each with one entryway, 7” EPS & one set of 2×4’s for temporary wooden rib system) can be picked up by the buyer if the following size truck, trailer and straps are used.

15′ kit: 

1/2 ton truck minimum (Ai recommends 3/4 ton truck )
13 ea.  2″ x 30′  straps Working Load Limit 3000 lbs.
Trailer specifications
7′ wide 20′ long minimum
tandem axle 3000 lbs. each axle
axles with brakes
bed height of 48″ max

18′ kit: 

1/2 ton truck minimum  (Ai recommends 3/4 ton truck )
13 ea.  2″ x 30′  straps Working Load Limit 3000 lbs.
Trailer specifications
7′ wide 22′ long trailer minimum
tandem axle 3000 lbs. each axle
axles with brakes
bed height of 36″ max

15′ & 18′ Kit:  If 3 ½” EPS and no drywall one truck can carry up to ten 15’ kits; or up to  four 18’ kits. 22’, 27′, 30′ and 34′ kits cannot be purchased with 3 ½” EPS.  The panels are too large in these larger kits to manufacture with thinner 3 1/2″ insulation. The 7″ insulation is required so the concrete panel is not flexible during movement.

For international shipping the following number is the number of 15′ and 18′ kits can fit in one 45′ high cube container.  To learn about importing, click on importing

Four 15′ kits with 7″ EPS, 1/2″ drywall, standard 4′ risers & 2′ risers & two sets of 2×4 ribs.
Eight 15′ kits with 3 1/2″ EPS, no drywall, standard 4′ risers & 2′ risers & two sets of 2×4 ribs.

Two 18′ kits with 7″ EPS, 1/2″ drywall, standard 4′ risers & 2′ risers & one set of 2×4 ribs.
Four 18′ kits with 3 1/2″ EPS, no drywall, standard 4′ risers & 2′ risers & one set of 2×4 ribs.

AVAILABILITY:  Depending on time of year allow 4 to 8 to 16 weeks after deposit with  Kit Order Form, Conditions of Sale with Material Order Agreement.

25% Discount —Residential Building Plans For Tiny Homes
When Plans Ordered per Coupon

To view samples of floor plan layouts, click on Stock Plans. If you do not see a stock plan to fit your desires, Ai can modify or customize a plan from your sketches and descriptions.  Each Set of Building Plans includes the floor plan layout(s) and consists of 13 – 17 blueprints depending on type of entryways and dormers in your kit.  To view sale pricing on all the stock plans and the dome building kit for each plan, click on Stock Plans & Kit Sale Prices.

Ai’s philosophy is that each Buyer pays for only what they need.  Ai does not burden the price of the building kit with plan’s pricing, engineer seal cost or energy report cost. Building plans are purchased three months to -1 1/2 years prior to kit shipment.  About 50% of the building departments require engineer sealed plans and an energy report to issue a permit. As a result, each customer pays for their plans separately from the building kit and pays for a seal and energy report only if their building department requires them.

Building Departments vary by state as to what they require to issue a new home building permit.  If you give Ai your parcel ID number & building department name, we will call and email info to them and find out what is required for them to issue a permit.  Will they require the building plans to be sealed and stamped by an engineer licensed for your state? Will they require an Energy Report?  If required these items can be purchased from American Ingenuity. To learn more about building permit, click on permit.

The standard foundation under Ai’s domes is a concrete slab. Other types of foundations; i.e. basements, stem wall, pilings, require the hiring of an engineer. Call for engineer pricing. Each buyer tells Ai the type foundation they want designed.  The foundation type is determined by property terrain, building department requirements and requirements from a soil report.

Plans may be purchased with a credit card, check or money order. Stock plans utilize a concrete slab foundation and are delivered within 2-4 weeks, Allow at least 5 modified plans and 8-10-12 weeks for custom plans.

SPECIFICATIONS

AREA AND VOLUME:   15’, 18’ & 22’ can have attic/loft. 27’, 30’ & 34’ can have second floor. 27’ & 34’ dome second floor can have bedroom because window dormer accepts fire egress window. 30’ dome panels are too small to have second floor window dormer; as a result 30’ second floor can be utilized for rec room, office, craft room, bathroom…not a bedroom.

4

HEIGHTS:  Ai dome kits come with standard 4’ vertical riser panels before triangle geometry starts. 15’ & 18’ Kits come with standard 4’ risers & additional 2’ risers. 22’ & 27’ Kits come with standard 4’ risers or custom 5’ risers can be ordered w’ taller entryway & taller first floor door dormer base panels. 30′ & 34′ Kits come with standard 4′ risers. Ai cannot ship 5’ risers for the 30’ – 48’ dome kits because the five foot risers do not fit on the truck. For 30’ & 34′ kits custom 2’ risers can be installed above the standard 4’ risers with taller entryway base panels ordered

5

WIDTHS:

6

PANEL WEIGHTS:

7

Two diagrams below represent geometry for 15’ & 18’ w’ 4’ risers & additional 2’ risers. 22’ & 27’ have 4’ risers or 5’ risers. 30’ & 34’ have 4’ risers or additional 2’ risers can be installed above the 4’ risers.

8

INSULATION:                                                     3 1/2″ EPS                                               7″ EPS
THERMAL RESISTANCE:                                R-14                                                          R-28
THERMAL CONDUCTIVITY:                            K=0.0714 BTU/hr./sq.ft./F                      K=0.0357 BTU/hr./sq.ft./F

DOME GEOMETRY:  Frequency is the number of intersections from the center of one pentagon to the next.

  • 15’, 18’, 22’, 27’ domes are 2-frequency, 1/2 spheres. 15’ & 18’ are on 4′ vertical risers plus 2’ risers. 22’ & 27’ domes are on standard 4 ’ risers or custom 5’ risers.
  • 30′ & 34′ domes are 3-frequency, 3/8 spheres on a 4′ vertical riser.  30′ & 34′ domes can have additional 2′ riser installed above 4′ standard riser.

 

Conditions and costs may change requiring our prices to increase without prior notice.

AMERICAN INGENUITY, INC.
8777 Holiday Springs Road, Rockledge, Florida 32955-5805
PHONE: 321-639-8777
email: GlendaB.Aidomes@gmail.com

Interested in Tiny Dome Home Kits for Special Hideaway, vacation cabin, second home, guest house, hunting cabin, glambing, tiny home, micro home, cottages for resort, mother in law home, rental units for veterans, or starter home? The Ai dome is much stronger, has noncombustible materials in its wall panels, fire resistant concrete exterior & more insulated than a log cabin, concrete block house, framed structure, tent or yurt.  Exciting News Ai has added two new tiny home sizes to its Tiny Home assortment – 15′ and 18′!  These Tiny Dome Home Kits are constructed using Ai’s superior prefabricated insulated concrete panel system. Below is single photo of 22′ dome and below that is Photo Gallery of various Tiny Home Photos.  Scroll below to see Ai’s sample stock floor plan layouts for Tiny Homes (172 sq.ft. to 1,278 sq.ft) and photos.  To view sale pricing for the kits shown in the layouts, click on Tiny Home Kit & Plans Sale Pricing.

22-woods-demo

Photo is of Assembled 22′ Kit – 370 sq.ft.
Ai has 15′ & 18′ & other Tiny Home Kits. See Below.

(click small images to change pics or use arrows on right side of main pics)

The following three floor plans are the layouts

that were built in the domes featured in the above photo gallery.

 New Mexico – Floor Plan -Three 22’ Domes

South Carolina – Floor Plan – 22’ Tiny Home

Florida – Floor Plan 22’ Workshop Dome

Within the top photo gallery there are pictures of three different 22′ domes which were built from customized 22′ plans. 

  1. The New Mexico – three 22′ domes were built for a 1,189 sq.ft. vacation home.  To view photo gallery containing other photos of the NM domes, click on three 22′ domes.
  2. The South Carolina 22′ dome was built as a one bedroom one bath tiny home of 388 sq.ft including storage area. Separate 12′ Pod has 109 sq.ft. for washer and dryer.
  3. The Florida 22′ dome was built for a 349 sq.ft. work shop.

American Ingenuity’s Tiny Dome Kit assortment consists of six kit sizes measured in diameter by feet: 15′, 18′, 22′, 27′, 30′ & 34′.  These domes have square footage from 172 to 1,278.   Below are stock plans for the 15′ – 34′ domes and pictures of a 34′ dome home with other info.  To view regular and sale pricing with specifications on the 15′, 18′, 22′, 27′, 30′ & 34 click on Tiny Dome

  1. 15′ – 172 sq.ft. – one bedroom one bath size – one floor with optional attic/loft.
  2. 18′ – 249 sq.ft. – one bedroom one bath size – one floor with optional attic/loft.
  3. 22′ – 370 sq.ft. – one bedroom one bath size – one floor with optional attic/loft.
  4. 27′ – 786 sq.ft. – two bedrooms two bath size – two floors. Two frequency geometry that allows for 2nd floor egress window.
  5. 30′ – 1,089 sq.ft. – one bedroom one bath size on first floor. No egress window on second floor (3 freq)…use second floor for storage, office, work shop, additional bathroom or craft area.
  6. 34′ – up to 1,100 – 1,278 sq.ft. – two bedroom two bath size – two floors.  Second floor window dormer panels will not accept fire egress size window. As a result  a second floor door dormer is installed above above a first floor standard entryway to frame in egress window.

As far as Tiny Homes meeting minimum size house requirements – in some areas groups are petitioning their county or their city governing bodies to allow them to have Tiny Home Communities (called pocket neighborhoods) where the minimum house size can be below state code. The City of Rockledge Florida agreed that a group whose face book page is called Rockledge Tiny House Community can purchase property and build Tiny Homes from 172 sq. ft up to 1000 sq ft. in their city.   Normally in Florida the minimum new house size requirement is 500 sq.ft. or 800 sq.ft. or 1,000 sq.ft.  So congratulations to the City of Rockledge Tiny House Group for its victory in changing minimum size house requirements in their city to 172 sq.ft.

magnifier-pdfViewing Tip: To enlarge an image use Ctrl and + on your keyboard.
Use Ctrl and 0 to return to default viewing.
Ctrl = Cmd on Safari
15′ Tiny Dome Stock Floor Plans

15′ Dome: one bedroom one bath Tiny Home with first floor of 172 max square feet. The dome kit comes with standard 7″ R28 insulation, standard four foot risers and additional two foot risers. Please check your local building code requirements to see if there is a minimum size new home requirement. In Florida the minimum size new home that can be built is 170 sq.ft. or 500 sq.ft. or 800 sq.ft. or 1,000 sq.ft. And in some areas building code requires a garage. An attic loft can be designed.

15′ dome kit can be purchased with 3 1/2″ EPS and no 1/2″ interior drywall. Up to Ten 15′ kits with 3 1/2″ EPS & no 1/2″ drywall can fit on one 53 foot step deck semi-truck  Or up to five 15′ kits with 7″ EPS & 1 2″ Drywall can fit on one semi-truck.

Online Viewing – Opens in Browser

 

18′ Tiny Dome Stock Floor Plans

18′ Dome: one bedroom one bath Tiny Home with first floor of 249 max square feet. The dome kit comes with standard 7″ R28 insulation, standard four foot risers and additional two foot risers.Please check your local building code requirements to see if there is a minimum size new home requirement. In Florida the minimum size new home that can be built is 170 sq.ft. or 500 sq.ft. or 800 sq.ft. And in some areas building code requires a garage. An attic loft can be designed.

18′ dome kit can be purchased with 3 1/2″ EPS and no 1/2″ interior drywall. Up to four 18′ kits with 3 1/2″ EPS & no 1/2′ drywall can fit on one semi-truck. or two 18′ kits with 7″ EPS can fit on one semi-truck.

22′ Tiny Dome Stock Floor Plans

22′ Dome:  one bedroom one bath size dome home with only first floor with max square feet of 370. Please check your local building code requirements to see if there is a minimum size new home requirement. In Florida the minimum size new home that can be built is 500 sq.ft. or 800 sq.ft.   And in some areas building code requires a garage. A storage loft can be designed.

27′ Tiny Dome Stock Floor Plans

27′ Dome:  two bedroom one bath size dome home for max square feet of 786 on the two floors (555 on the first floor and max 231 sq.ft. on the second floor).   Due to spherical dome shape, the 27′ dome’s second floor exterior walls slope down from 9’1″in the center to the floor.  Code allows for square footage to be calculated to five feet of height.  The 231 second floor square footage in the 27′ dome is the area that is below the 9’1″ center to where the dome walls slope down to five feet tall.  Around the second floor five foot perimeter areas the following items can be placed:  headboard for bed, night tables, desks, or dressers.  

All American Ingenuity domes can be designed without a second floor.  The total amount of square footage in each plan varies depending upon how much of the second floor is designed and built. If you want to look at only plans with a bedroom on the first floor that can be utilized as master bedroom, we have added the words bedroom 1st floor with that plan name.

30′ Tiny Dome Stock Floor Plans

30′ Dome:  one bedroom one bath size dome house total 878 square feet on two floors.  Bedroom is designed on the first floor. The 30′ domes second floor panels are too small to accept a window dormer.  As a result a bedroom cannot be installed on the second floor because there is no fire egress window. The second floor could be used for storage or office area, craft room, etc.  (665 on the first floor and max 213 sq.ft. on the second floor).   Due to spherical dome shape, the 30′ dome’s second floor exterior walls slope down from 8’4″in the center to the floor.  Code allows for square footage to be calculated to five feet of height.  The 213 second floor square footage in the 30′ dome is the area that is below the 8’4″ center to where the dome walls slope down to five feet tall.  Around the second floor five foot perimeter areas the following items can be placed:  headboard for bed, night tables, desks, or dressers.  The 30′ dome can be built without a second floor.

34′ Tiny Dome Stock Floor Plans

34′ Dome two bedroom two bath size dome house total 1,278 max square feet on the two floors.  Bedroom & bath on first floor and bedroom & bath on the second floor.  (852 on the first floor and max 427 sq.ft. on the second floor).   Due to spherical dome shape, the 34′ dome’s second floor exterior walls slope down from 9’9″ in the center to the floor.  Code allows for square footage to be calculated to five feet of height.  The 427 second floor square footage in the 34′ dome is the area that is below the 9’9″ center to where the dome walls slope down to five feet tall.  Around the second floor five foot perimeter areas the following items can be placed:  headboard for bed, night tables, desks, or dressers.  

The 34′ dome can be designed without a second floor.  The total amount of square footage in each plan varies depending upon how much of the second floor is designed and built.  If you want to look at only plans with a bedroom on the first floor that can be utilized as master bedroom, we have added the words master 1st floor with that plan name.

++++++++++++++++++++++++++++++++

Have you dreamed about living in a super-Green, super strong home? Would you like good living in small spaces? American Ingenuity has the solution for you.  Choose from six sizes: 15′, 18′, 22′, 27′, 30′ or 34′ tiny domes. Or utilize the 15′-34′ domes to build a small vacation home, glambing dome, get-a-way or work shop dome. Can’t envision living in such a tiny home, view Ikea YouTube to see video filmed by an Ikea customer in Ikea store.
The 22′ dome can also be a built as a one car garage dome.   The 27′ dome can be built as a two small to medium car garage.  This link has garage dome info.22' Exterior solar Pineapple garage

 22′ dome utilized as one car garage linked to 34′ – 1,075 sq.ft. dome home

Each prefab panel’s core is 7″ EPS (expanded polystyrene) R-28 insulation precisely angle cut to form the geodesic shape.   Applied to the outside is pre-finished three quarters inch concrete, reinforced with galvanized steel mesh and fibers.  Applied to the interior is half inch Georgia Pacific DensArmor gypsum wallboard….gypsum’s facing is fiberglass instead of paper.  Wallboard is moisture resistant and mold resistant. No wood in or on the shell to rot or for termites to eat or to burn.  No shingles to blow off in high winds.  On site after the kit is assembled, the exterior concrete is primed and painted with paint. The 15′ and 18′ dome kits can be purchased with 3 1/2″ R14 EPS, no interior 1/2″ drywall & no steel reinforced concrete exterior.  Larger domes cannot be purchased this way because the larger size panels cause the EPS to be flexible and break.

The kit assembly begins after the foundation and floor are completed and a temporary wooden rib system is assembled in the geodesic shape.  The assembly process consists of stacking the panels on the rib system overlapping and locking the steel mesh of adjacent panels, filling the seams with special formulated concrete and concreting of the entryways and dormers.  Finish the interior wall board seams with tape and joint compound.  This process produces the structural components, completes the finished exterior surface, installs the insulation and all the interior shell wallboard.  To view a video on the 22′ Assembly, view Special Hideaway.  To view pictures showing general panel assembly, view Dome Kit Assembly.

On site, under the entryways and dormers a 2×4 or 2×6 wall is framed in to install your locally purchased doors and windows.

The concrete applied in the seams and on the entryways and dormers is sponge finished to match the pre-finished texture of the concrete panels. The dome is primed with concrete primer and then painted with two coats of exterior concrete paint to achieve the color you desire.

All panels are premarked with numbers and letters to match the building plans and the Assembly Manual. The most successful dome kit assemblies result when the home owner hires the independent Kit Assembly Consultant to supervise the temporary rib system assembly & the kit assembly. If your budget is tight consider hiring the Consultant for a minimum of three days to supervise the rib system assembly, concrete mixing and first row of panel assembly…..just to get you started.  If you desire to hire a builder, he or she can hire the Assembly Specialist to supervise their workers to get the dome kit assembled with the first layer of concrete in the seams and on the entryways and dormers.  To view Ai’s web site file about the independent Specialist, view Specialist.

Prior to assembly of the dome kit, a temporary wooden rib system is assembled using your own 2×4’s cut to specific lengths (or purchase the cut, drilled, painted 2×4’s from Ai), bolts/nuts/washers purchased from Ai  and steel hubs borrowed from American Ingenuity by placing a $455 deposit.  This deposit covers a 5 month rental period ($20 a month thereafter).  Once the dome kit is assembled, the rib system is removed with the client mailing or UPSing the hubs back to Ai to receive a deposit refund.  Triangle Panels weight 155 to 180 lbs. Risers weight 255 lbs.  During assembly the panels are placed with some type of hoisting mechanism.  Lifting spikes are purchased from Ai.  To view American Ingenuity’s web site file that explains the rib system, view Support System. If importing the kit out of the USA, buyer purchases the steel hubs from Ai.

Please check with your building department, some have minimum house square footage requirements .  If the 15′, or 18′ or 22′ dome may not meet their requirements. Ai manufactures a 27′ in diameter dome that can have 555 sq.ft. on the first floor and 225 sq.ft. on the second floor for a total of 780 sq.ft.  To view Ai’s web page that lists the dome sizes with their square footages, view Dome Sizes.

Please contact your building department and ask:

  • If there is a minimum size new house requirement?
  • Do they require a garage to be built with the house?  If so is there a minimum size garage requirement?
  • What do they require to issue a building permit?  Do they require engineer sealed plans and an Energy Report?  If so, those items can be purchased through American Ingenuity. The Energy Report has evolved into a very specific and technical report that requires Ai to have specific window and exterior door info (frame type, double pane or impact resistant glass), Low E number, U factor, SHGC number to fill out the Energy Report.  This means the dome buyer will shop for their exterior doors and windows and provide detailed spec sheets to Ai about each door and window, their water heater and AC/furnace.

Payments: American Ingenuity kits are not stocked and are manufactured on a custom order basis and are considered a Specialized Order, made exclusively for the customer requesting it.  These Specialized Orders require a 30% to 40%  deposit, signed Order Form, Conditions of Sale and Specialized Material Agreement. Once Ai receives these items, materials will be purchased and manufacturing started to meet your shipment date. If you cancel your order after signing the Specialized Agreement 30% deposit on each kit is non-refundable and your rights to the kit(s) are forfeited.  The balance, in the form of a cashier’s check or bank check including USA shipping costs (made out to American Ingenuity) is due 21 days prior to shipment. Florida residents, add sales tax plus your counties’ surtax.  Credit Cards are not accepted on the building kit. If the building kit is shipped out of Florida, no Florida sales tax or surtax is paid. If kits are exported, buyer pays freight forwarder directly for inland trucking costs and ocean shipping costs.

Delivery and Availability:  Once Ai receives your 30% or 40% deposit (deposit amount depends on kit size) based on your Building Kit with options pricing and signed Building Kit Order Form, Conditions of Sale and Specialized Material Agreement, American Ingenuity schedules your kit for manufacturing. Depending on the time of year and size of dome, allow four to six to twelve weeks for manufacturing time.

SHIPPING: If your site is in the continental USA, American Ingenuity can arrange shipping on 53’ step deck semi-truck. Freight varies from $2.70 to $2.90 per mile ($800 minimum) per truck, from American Ingenuity plant in Rockledge, Florida. One truck can carry five 15’ kits; or two 18’ kits; or two 22’ kits; or one 22’ kit & one 27’ kit; or one 30′ kit; or one 34′ kit – each with 7” EPS insulation.

15′ & 18′ Kit:  If 3 ½” EPS and no drywall one truck can carry up to ten 15’ kits; or up to four 18’ kits. 22’, 27′, 30′ and 34′ kits cannot be purchased with 3 ½” EPS. The panels are too large in these larger kits to manufacture with thinner 3 1/2″ insulation. The 7″ insulation is required so the panel is not flexible during movement.

For international shipping the following is the number of 15′ and 18′ kits that can fit in one 45′ high cube container. To learn about importing, click on importing.  2×4 ribs refers to 2×4’s that are cut, drilled & painted to specific specs for the temporary support system described above.

Four 15′ kits with 7″ EPS, 1/2″ drywall, standard 4′ risers & 2′ risers & two sets of 2×4 ribs.
Eight 15′ kits with 3 1/2″ EPS, no drywall, standard 4′ risers & 2′ risers & two sets of 2×4 ribs.

Two 18′ kits with 7″ EPS, 1/2″ drywall, standard 4′ risers & 2′ risers & one set of 2×4 ribs.
Four 18′ kits with 3 1/2″ EPS, no drywall, standard 4′ risers & 2′ risers & one set of 2×4 ribs.

The number of kits that can fit on one truck or in one container can change if the building kit contains maxed out entryways, dormers, link and thicker insulation. For example, a 48′ kit with 9″ EPS cannot fit on one semi-truck.  Entryways and a link take up more space than triangular and riser panels.  Once you select your floor plan, Ai can be specific about how many truck(s) or containers your order will take. Each International client hires a freight forwarder to coordinate their container’s shipping and pays their shipping and custom fees directly to the freight forwarder.

Ai’s manufacturing costs in Florida are well below the national average, which offsets any long distance shipping expenses. Ai can actually manufacture a kit here in Florida and ship to western states – Washington, California, Nevada, Oregon, Utah, Arizona, etc. cheaper than we could manufacture it there. Having our manufacturing plant located in Florida is advantageous for shipping since more is shipped in than out of the state, leaving many trucks headed out empty.

Ai utilizes independent trucking agencies. American Ingenuity contracts to have these trucks carry your building kit outside Florida for approximately $2.50  to $2.90 per mile per truck from Ai’s plant in Rockledge, Florida. Shipping within Florida is a minimum of $800. If your Florida building site is south of our factory, the truckers charge more because they have to drive south before they can drive north to leave Florida.  These trucking costs are less than Ai could do with our own trucks because if we used our own trucks, they would have to deliver the kit and return to our factory empty.

Per mile shipping costs can vary due to fuel costs and travel distances. View Shipping to learn more.

American Ingenuity’s Philosophy:

One of the main reasons American Ingenuity is very reputable is that we really try to treat all our customers the same. Our business philosophy and product is unique to the housing industry. Ai believes that each client should pay for only what they need.

  • Each person who wants to research our building kit further can do so by purchasing the Planning Kit with DVD or purchase the DVD separately.
  • None of Ai’s staff is on commission.
  • About 40% of Ai’s clients do not need engineer sealed building plans, or Energy Report or Structural Calculations in order to obtain a building permit. As a result the seal, energy report and calculations are separate costs and paid only by those whose building departments require them.

As a result of the above philosophy, the American Ingenuity dome shell kit costs about one third to one half less than the shell materials cost for a conventional house or wooden dome or sprayed concrete dome.

Due to spam filters your email requests may not make it to American Ingenuity and our email replies may not make it back to you.  If you email Ai and do not receive a reply in one to two days, please call us – 321-639-8777.  While you are on the phone, we will send you a test email and have you send your email to us.

The information below is in reference to a specific 22′ floor plan named Eco Custom Cottage.

This is a 22 foot in diameter dome kit, which Ai has customized. Please call for pricing. This custom 22’ in diameter dome when finished has a first floor living space of 371 sq. ft. with an optional attic of 127 sq. ft. Ai has raised the riser wall height from four feet to five feet.  The additional one foot in height increases the attic square footage to 127 sq. ft., which is an additional 46 sq. ft. over the basic 22’ dome building kit.  The exterior of each triangle & riser panel is steel reinforced concrete.   The middle of the panel is 7″ EPS insulation (R-28) with 1/2″ Georgia Pacific DensArmor Gypsum drywall adhered to the underside of the EPS with wallboard adhesive.  Ai has based the pricing for this kit upon Ai selecting the week/day of shipment during the month agreed upon by Buyer & Ai.

 

22 Ft Dome

 

22′ Eco Custom Cottage Floor Plan PDF Picture

This Eco Custom Cottage Kit consists of all the component prefab panels to assemble the dome shell, one entryway, two window dormers, one door dormer and misc items. No windows or exterior doors are included.  No interior items are included other than the interior 1/2″ Georgia Pacific shell drywall.  Call American Ingenuity for shipping details.   Does your building department require engineer sealed plans and an Energy Report to issue a building permit?  If so those items can be purchased through Ai.

Approximate room sizes once the interior walls are framed in:  Bedroom 10’10” x 7′; closet 2′ x 6′; living 7’5″ x 10’7″; kitchen 11′ x 10’7″; Washer Dryer area 3’5″ x 3’3″; Bath 7’3″ x 9′.  Approximate attic area between five feet six inches and seven feet ten inches in height is 109 sq.ft.

22’ Eco Custom Cottage Dome Building Kit Package Includes:

  • All the prefab panels to assemble the 22’ shell with 7″ EPS, five foot tall riser panels and the panels for one entryway, two window dormers, one door dormer.
  • Assembly Manual
  • Parts lists items to suspend the optional attic: 7suspension rods with top and bottom plates with Simpson Hangers.
  • 8 cans of expanding foam. Metal Dispensing Gun, and two cans of cleaner.
  • Five – 4×8 sheets of 1” EPS insulation for entryway, door dormer, window dormer framing
  • 134 sq.ft. of ¼” x ¼” galvanized steel mesh as lathe for entryway, door dormer and window dormer framing 
  • Misc. items: C rings, two pair C ring pliers, bonding agent, synthetic fibers and liquid admixtures A & B for cement and two steel cables (wrap around dome).

The Kit does not include building plans, engineer seal on plans, energy report, shipping cost, foundation (monolithic slab), assembly costs, purchase of lifting spikes , purchase of 144 bolts/nuts/washers, deposit on 26 steel hubs, precut 2×4’ ribs for rib system, framing for doors and windows, or any interior items except for the interior shell wallboard.  The deposit on the hubs is refunded once the hubs are mailed or UPSed back to Ai during the five month rental period. A rental costs for each month over five is $20. If importing kit, hubs are purchased, rental for telescoping for lift is added and $200 international paperwork fee. View Importing for complete details.