predetermined | AiDomes

Please scroll down the page to find chart showing specifications for Geodesic Dome Home, square footage by floor,  first floor ceiling height if a second floor is installed above first floor, dome interior height, etc.   To view  15′ & 18′ dome specs, click on Tiny Home Specs. 

To view Dome Diameters in Meters and floor plan square footages in square meters, select page 2.

American Ingenuity manufacturers ten different prefab home kit sizes also called Modular Home.  Domes are measured by diameter in feet.  The 15′ & 18′ & 22′ domes can have a first floor only with optional attic/loft while the 27′, 30′, 34′, 36′, 40′, 45′ and 48′ domes can have a second floor framed with wood 2×10 joists.  If a cupola is installed on top of a 40′, 45′ or 48′ dome there is enough interior height to install a small loft area under the cupola.

The floor plan selected determines how much of the second floor is installed. Where a second floor is not installed there will be high vaulted ceilings over first floor areas.   It is typical that one half to two thirds of the second floor is installed.  However any of the domes can be  built with no second floor.   Below are pictures of some of the dome sizes.

Ai’s Tiny Home Kits 15′ & 18′ come with 4′ risers and additional 2′ risers.  A’s 22′ – 48′ dome kits include four foot tall riser panels before the triangle geometry.  Ceiling Heights in first floor rooms that have second floor installed above them is either 7′ 6″ or 8′.   22′, 27′, 30′, 34′ & 36′  kits – 7’6″.   40′, 45′ & 48′ – 8′.

How to have 8’6″ or ten feet first floor ceiling heights in rooms with a second floor installed above them:  In 22′ & 27′ domes custom order five foot tall risers instead of the standard four foot tall risers which results in eight foot six inch ceiling height.  In 30′, 34′, 36′, 40′, 45′ & 48′ domes order taller entryway panels and custom  2′ risers to install above the standard risers to result in either 9’6″ or ten foot first floor ceiling height in areas where a second floor is installed above the rooms.

Hamilton Dome Ext DSCN7883 - 1

40′ Garage Dome on the left linked to a 45′ Dome Home


Henderson domes flash 2a

40′ Garage Dome on the left linked to a 48′ Dome Home


Dome with two standard entryways on basement

40′ Dome with two standard entryways on basement

Exterior basement NC from up the hill

34′ Dome on full basement



27' garage dome with garage door up.....can park two medium size vehicles.

27′ garage dome with garage door up…..can park two medium size vehicles.

Or 27′ dome can be built as a two bedroom/two bath dome home. 

Dome on the right is 40′ in diameter.

22' dome with two entryways.

22′ dome with two entryways

  •  To learn more about entryway widths, panel weights, etc., scroll down.
  • To view sample stock plans, click on dome home plans.
  • To learn more about entryways, cupolas, etc., view Building Options.
  • To learn what is included in the Dome Building Kit, view Building Kit Contents.
  • To learn about dome kit sale prices, view Sale.
  • To view pictures of the Kit Assembly Process, view Kit Assembly.
  • To view info about Construction Overview, view Overview.
  • To learn about the regular pricing for each stock plan and the corresponding regular pricing on the building kit for that stock plan, click on Stock Plans & Kit Regular Prices.
  • To learn more about interior finishing click on Finishing.
  • To view  15′ & 18′ dome specs, click on Tiny Home Specs.

DOME GEOMETRY: Frequency is the number of intersections from the center of one pentagon grouping to the next pentagon grouping.

  • Ai’s 15′, 18, 22’ and 27′ domes are 2-frequency, 1/2 spheres on a 4′ vertical riser.  The 15′ & 18′ kits come with 4′ riser and additional 2′ risers. Instead of the standard four foot riser panel, a five foot riser panel with taller entryway panels can be ordered for the 22′ & 27′ kits.
  • Ai’s 30’, 34’, 36′, 40’, 45’, and 48′ domes are 3-frequency, 3/8 spheres on a 4′ vertical riser.  On site a one foot or two foot tall wall can be built to install the risers on which increases first floor ceiling height (where 2nd floor built above first floor) to 9′ or 10′.  Or additional 2′ risers can be ordered and installed on the standard 4′ riser panels.

American Ingenuity’s 30′ through 48′ in diameter domes are approximately a one half sphere with a four foot tall riser wall.

5/8 Domes:

  • Ai. finds it more practical to use a vertical 4′ riser wall on all of its domes instead of designing its domes with the 5/8 geometry.
  • Ai’s 30′ dome turns out to be almost the same height as a 5/8 dome.
  • Also the 4′ riser wall makes for a better shaped entryway and allows the dome to link with all of our other size domes.

(Click on chart below to enlarge)


Panel Composition: To learn more about the panel composition, view Composition.

To view Dome Diameters in Meters and floor plan square footages in square meters, CLICK HERE

 The following covers Choosing a Contractor to assemble the prefabricated dome kit.
Starting Second Row of Panel Assembly

Starting Second Row of Panel Assembly- 45′ Dome

Over 40% of our clients are owner builders and assemble their own concrete shell themselves. The Prefab Kit panels come marked with numbers and letters to match the Assembly Manual that goes with the building kit. The building plans also have a nomenclature sheet showing all panels with all panels numbered and lettered.  If you do not have the time or do not want to assemble the dome shell kit, Ai knows of an independent specialist that will supervise your workers or your contractor’s workers and assemble the shell. By using a shell sub, this will greatly take the heat off your contractor to estimate the shell assembly  costs as he has not assembled one of our kits before. To learn more about this service click on Kit Assembly Consultant.


Using three to five good laborers and depending upon the size dome and type of hoisting mechanism utilized, shell assembly (kit with two entryways and four dormers) can take from 9-16 days. Once you decide on your floor plan, the number of entryways and dormers will be known allowing the use of the info on the consultant page to estimate kit assembly time.To view pictures of the kit assembly, click on Dome Kit Assembly and Construction Overview.

You or your contractor hire conventional subcontractors to do the normal jobs like forming and pouring the slab, plumbing, electrical, framing, etc.


A few years ago prior to knowing of a consultant who would supervise the shell assembly, some of our dome owners had to hire contractors or individuals that had never assembled an Ai dome kit. As a result the contractor had to overcharge the dome owner because they did not know what problems they would run in to. Many times they would charge as much as the cost of the building kit for the labor cost to assemble the kit.

The Kit Assembly Specialist works directly for you as an independent subcontractor and can provide you with references for previous Ai domes built.  Using this consultant will assure that your panels are assembled in the correct location and in a timely fashion.


If you are interested in utilizing the Specialist, call our office at 321-639-8777 Monday through Friday 9-5 eastern time. 
Please visit your local library to read books that cover building your own home. A helpful web site is They sell construction manuals, construction estimating CD’s, etc.


The methods used for lifting the panels include:


Man lifts or small cranes that can lift 400 – 500 lbs; 25 ft up and 25 ft out, Highlifts (all terrain scissors forklifts often used by roofers).


Monthly rentals on transverse lifts also called Boom Lifts, Horizontal Boom Fork Lifts, Roofing Lifts, Shooters are available from National Rental Chains like US Rentals, Hertz Equipment Rentals, United Rentals, etc. The companies can be found in the telephone book.  To learn more click on Hoisting Mechanisms.

Choosing a Contractor or Sub-Contractor

Making a choice: 

There are many considerations when selecting the contracting firm to build your new dome home. To help you make this important choice, find out all you can about contractors in your area.


The more you know, good or bad, the better prepared you will be for a project of this scale and complexity.


If you are building your dome yourself as an Owner-Builder, you will be operating as the contractor and accepting all those responsibilities. This will include making the choice of all the subcontractors who will be working on your dome, such as the electrician, carpenter, and plumber.


If you are building with a construction loan, your lender may require a written contract between you and a licensed contractor, binding both of you until the completion of the job.


Just like people, there are contractors of every type out there – honest and dishonest, good and not so good. If you take the time to be selective you can find one of the great.


While each contractor is reviewing your plans to arrive at an estimate for his work, you will be able to evaluate his nature and characteristics.


With a good and trustworthy contractor, building your home can be one of your most exciting and rewarding accomplishments.


What to look for:

  1. Search the experience of the contractor and talk to previous customers.

  2. Visit his job sites.

  3. A Contractor who:

o Shows an interest in doing something unique.

o Has a positive attitude.

o Is a creative thinker – he looks for solutions rather than complaining about problems.

o Exhibits professionalism in his business.

o Is organized in his work.

o Displays neatness on his job sites.

o Has a good credit history.

What to look out for:

  1. A contractor who promises too much, too quick, for too little. A contractor who says, “Just trust me…..”
  2. A contractor who can’t supply you with names of previous satisfied customers, copies of insurance forms, a permanent business address, or occupational license numbers.
  3. If a contractor is a poor manager and about to go out of business, his credit with suppliers is one of the first places it will show up. Ask where he has credit accounts and call to see if he is in good standing with his suppliers.
  4. If someone gets injured on your property during construction, you will most likely be held responsible for all expenses unless your contractor has Workman’s Compensation Insurance. Check to be sure that he does.

Where to look:

  1. Scan through the yellow pages and their ads, making lots of calls. Approach friends, family, business contacts, and people you work with for recommendations.
  2. Question the building materials suppliers, eg. concrete delivery companies know of reliable subs for foundations.
  3. Inquire of your building official if he has any suggestions.
  4. Check with your Chamber of Commerce or Better Business Bureau.
  5. Contact local chapters of trade organizations such as the National Association of Home Builders. 

By reviewing as many prospects as you can over the phone, and through a process of elimination, you will be able to narrow the list to a few contractors to review your plans for a quote.

Agreeing on payment:

Because of the uniqueness of this project compared to most projects a contractor has, it will be very difficult for him to determine the exact cost to build your dome. Any experienced contractor has, at one time or another, lost money by bidding a job too low. So if he is not confident of what his costs will be, he will tend to overbid. If he does underbid, once construction begins he will see he is losing money and will start to cut corners, do poor quality work, and try to get out of the job before completion.


He may wish to bid your project on a “cost-plus” contract, in which the contractor charges for the expense of his materials and labor plus a percentage for profit. This is detrimental to you because the more he spends, the more he makes. We recommend a modified “cost-plus” arrangement in which the contractor is paid for his cost plus a predetermined dollar amount for profit. To learn more about determining how to pay your Contractor click on Paying Contractor.

When to pay:

Financial institutions never pay a contractor until each particular phase of work is completed. If you have the responsibility, and not your mortgage company, to pay the contractor, do the same and only pay the contractor in prearranged installments called draws. For example: 10% or $xxx after the foundation is complete, 10% or $xxx after the shell is complete, etc. If he does not have enough capital or credit to see him through a phase of construction, he is not an established businessman.


Never pay ahead for work that has not been done yet. And always withhold final payment until the entire job is finished and you are happy with the results. That is the best insurance you have to make sure he will return and complete the project.


Make yourself familiar with the lien laws for your state. If your contractor or subcontractor does not pay for the materials used in your house, even if you have paid him for those materials, the supplier may be able to place a Mechanic’s Lien upon your property, requiring you to pay them also. To learn more click on Mechanic’s Lien.



  1. Be sure everything that is important to you and everything you expect is written into a contract.
  2. We recommend you have a detailed, written understanding of the contractor’s responsibilities, what he is to do, and the items that are to be included. This can be done in an informal manner and can simply be an itemized list of what the contractor agrees to do and when, what you agree to do and when, and how much he will be paid and when.
  3. Include a general statement that all work will be done in a professional manner.
  4. If you have the option, we recommend an agreement which will allow either party some opportunity to back out or renegotiate the remainder of the jobs to be completed. If your contractor really wants out of the job, it is in your best interest to let him go. If you are dissatisfied, this will also provide you with an escape clause. It is not uncommon to change contractors during construction of any home.
  5. To encourage the contractor to complete the project in a timely and cost effective manner, include rewards for finishing early and below the estimated cost.
  6. Include a provision to reduce his profits for significant overruns and delays.
  7. A contract that rewards the contractor for good and productive service is the objective.
  8. Be sure both of you sign and date the contract. Keep a signed copy for yourself in a safe place where it is accessible when you need to refer to it.